Horn shaped radar water level gauge for open channel water level monitoring. Welcome to inquire by phone
Horn shaped radar water level gauge for open channel water level monitoring. Welcome to inquire by phone

Horn shaped radar water level gauge for open channel water level monitoring. Welcome to inquire by phone

Category:

Instrumentation/Special instruments and meters/hydrologic apparatus

Model:

Brand:

Hengrui

Retail Price

99.00USD


重量

kg

  • Product Description
  • Description :

      The maintenance of radar level gauges mainly consists of electronic components and antennas, with no movable parts. There are very few faults encountered during use. Occasionally, some volatile organic compounds in the storage tank may crystallize on the horn mouth or antenna of the radar level gauge. They only need to be regularly inspected and cleaned, and maintenance is minimal.

      Note for radar level gauge: 1. The measurement range starts from the point where the beam touches the bottom of the tank, but in special circumstances, if the tank bottom is concave or conical, measurement cannot be carried out when the level is below this point. If the medium has a low dielectric constant and the bottom of the tank is visible when it is at a low liquid level, it is recommended to set the zero point at a low height of C to ensure measurement accuracy. 3. It is theoretically possible to measure the position of the antenna, but considering the effects of corrosion and adhesion, the final value of the measurement range should be at least 100mm away from the antenna. 4. For overflow protection, a safe distance can be defined to be added to the blind spot. 5. The small measurement range is related to the antenna.

      The precision level and function of precision function inspection are selected based on measurement requirements and usage scenarios to achieve cost-effectiveness. For example, in situations such as trade settlement, product handover, and energy measurement, higher accuracy levels such as 1.0, 0.5, or higher should be selected; For process control applications, choose different accuracy levels according to control requirements; In some cases where only the process flow is detected without the need for control and measurement, a slightly lower accuracy level, such as 1.5, 2.5, or even 4.0, can be selected. In this case, a low-cost plug-in radar level gauge can be used.

    AfterSalesService :

    Key words:
    • Horn shaped radar water level gauge