Flat radar water level gauge, radar level gauge manufacturer, click in to get a quote

Description :

　　Maintenance of radar level gauge

　　Radar level gauges are mainly composed of electronic components and antennas, with no movable parts. They rarely encounter malfunctions during use. Occasionally, some volatile organic compounds in the storage tank may crystallize on the horn mouth or antenna of the radar level gauge. Regular inspection and cleaning are sufficient, and maintenance is minimal.

　　When purchasing a radar level gauge, it is crucial to consider which factors to choose based on. The purpose of using a radar level gauge product is to obtain a reflected wave on the surface of the measured material, but at the same time, there is no other interference or the interference wave is small. Based on its purpose, two conclusions can be drawn: one is the impact of the environment on the transmission path of electromagnetic waves; The second is the influence of the state of the measured material surface on the reflected signal.

　　Measurable medium

　　When measuring medium flow rate, instrument range, and caliber for general medium measurement, the full-scale flow rate of the radar level gauge can be selected within the range of 0.5-12m/s for measuring medium flow rate, which is relatively wide. The selection of instrument specifications (caliber) may not necessarily be the same as the process pipeline, and should be determined based on whether the measured flow range is within the flow rate range. That is, when the pipeline flow rate is too low to meet the requirements of the flow instrument or the measurement accuracy cannot be guaranteed at this flow rate, the instrument port diameter needs to be reduced to increase the flow rate inside the pipeline and obtain satisfactory measurement results.

AfterSalesService :

• Flat radar water level gauge