Tianjin Binhai New Area container dump truck

Description :

　　We all understand the principle, but many people just can't keep it in mind because they want too much. Whatever you can't get, let go and suddenly realize that there are even more things in life. Just like a philosophical saying goes, "If you clench your fist, you have nothing in your hand; if you release your palm, you will get underground mining tractors, large mining dump trucks, mining dump trucks, mining safety sign transport vehicles, underground special transport vehicles, underground mine car dump trucks, mining safety sign transport vehicles, underground special transport vehicles, underground mine car dump trucks. Basic introduction of the essential configurations of the mining four unlike car. The mining four unlike car is a brand new mining four unlike car with superior performance designed according to the requirements of farmers. It has no scrap and is suitable for transporting agricultural materials, wood, sand and gravel and other mining safety sign transport vehicles in forest and mountainous areas. The performance characteristics of the mining four unlike car dump truck are as follows: diesel engine: kinetic energy and rigidity. Using aluminum alloy material, it has a small weight, light weight, and low vibration. Depending on the power and location, single cylinder, dual cylinder internal combustion engines, and 4112 diesel engines can be selected. Smoke exhaust system: If the mining area you ordered does not work underground like a dump truck, we can also help you install an exhaust pipe purifier to protect the gas quality of the surrounding roads. Gearbox: Our company uses specially customized, Wanliyang, Fasite and other high-quality gearboxes to make driving as simple as a small car. Driving speed: The driving speed can reach 50-60 kilometers per hour, ensuring smooth and high-quality operation. Self dumping function: Each mining area in our company is equipped with a self dumping function, which can even help you install and catch wood. The operation is easy to understand and greatly improves the project efficiency. The main facilities of the slag removal vehicle include the control lever, main body, front axle, rear axle, etc. The second part is equipped with a high-power internal combustion engine, which has a large carrying capacity, and some can even transport 12 tons of slag. Non ferrous metal mining slag trucks can be selected with steering assistance, turbocharging, driver seat adjustment, diesel engine with single cylinder and dual cylinder internal combustion engine 4112 and other mining safety mark transport vehicles, underground dedicated transport vehicles, and underground mine truck dump trucks. Technical parameters of mining dump trucks include 12 tons (mining safety standards) engine model Yuchai turbocharged 4102 engine (110 horsepower) variable box model Wanliyang axle model, front and rear 1098 carriages, steel plate bottom 8 sides, 6 tires model 750-16 carriage size 3.4 * 2 * 0.7, overall vehicle size 5 * 2 * 1.7 (length, width, height), human-machine height 1.85m, exhaust gas treatment water treatment mining safety mark transport vehicles, underground dedicated transport vehicles, and underground mine truck dump trucks. Instructions for use: 1. Regularly check the oil level height and oil quality in the steering oil tank. 2. After the equipment has been parked for a long time or after maintenance, the air should be drained when refueling. The specific method is as follows: lift the front axle, fill the steering oil tank with oil, start the engine and turn the steering wheel left and right at a speed of 1000r/min until both ends reach the limit position (do not stay in the limit position for too long, otherwise the steering oil pump will heat up), repeat more than ten times. During the above operation, the steering oil tank should be continuously refilled with oil until the entire system is filled with oil and the liquid level reaches the oil gauge position. Turn the steering wheel again and keep the oil level calm without any bubbles. 3. The steering transmission mechanism should be regularly checked for the tightness of the nuts at each connection, and if any looseness is found, they should be tightened. 4. Check that there is no leakage at each joint surface. If there is, tighten the nut or replace the seal. 5. Each rod and hinge should be lubricated on time. 6. Check and adjust the front axle after every 2500km of driving. When adjusting, park it on flat ground, align the front wheels, loosen the locking nut on the tie rod, rotate the shaft sleeve to adjust the length of the tie rod, so that the toe in is 0mm~3mm, and then tighten the nut

AfterSalesService :

• Container overturned dump truck