Dangerous goods skeleton semi-trailer manufacturer announcement

Description :

　　Skeleton semi-trailer skeleton container transport vehicle container transport vehicle container carrier Container transport vehicles are a transportation method that loads a wide variety of goods, with different shapes and sizes, into specially designed boxes of standard size before transportation, in order to facilitate water land air intermodal transportation. It can achieve mechanization and standardization of loading and unloading, transportation, and is a major reform in traditional transportation methods and an important component of modern transportation. This specially designed box is a container; A vehicle specifically designed for transporting containers is a container transport vehicle. Since the 1960s, container transportation has developed rapidly in many countries and has now become an important mode of international transportation. From the process of material circulation, in most cases, cars are always responsible for the initial and final transportation of materials. That is to say, the development of container transportation will inevitably promote the development of automobile container transportation, otherwise the container transportation in the entire circulation field will be constrained. Therefore, with the growth of China's national economic output value, the rise of the automotive industry, and the improvement of road conditions, especially the construction of high-grade highways, the development of container transportation will become increasingly rapid.

　　Specially designed for the transportation of various containers such as 20, 40, 45, 48, 53 feet, etc

　　The design scheme is reasonable in structure, reliable in operation, beautiful in appearance, and maximizes the potential of the entire vehicle.

　　The diverse selection of products can meet the personalized needs of customers. According to customer needs, we can produce structures such as goose neck, skeleton, flat plate, and low flat plate.

　　The whole vehicle manufacturing is guaranteed by tooling, with stable quality and reliable performance.

　　Steel is sourced from large steel mills both domestically and internationally; The main purchased parts are selected from domestic and foreign brands, with reliable quality.

　　Perform shot blasting treatment on the entire vehicle to eliminate welding stress.

　　The paint should be selected from branded products and pre sprayed with anti rust primer to ensure that the vehicle's paint system has good anti-corrosion and anti rust performance.

　　Conventional recommended vehicle configuration:

　　Longitudinal beam height 480mm, upper wing plate 14mm, lower wing plate 16mm, web plate 8mm, 2 toolboxes, 2 spare tire racks, 4 sets of container locks, 3 Fuhua 13T axles, 28 ton single action support legs

　　Standard configuration of 40 foot skeleton car:

　　Longitudinal beam height 480mm, upper wing plate 14mm, lower wing plate 16mm, web plate 8mm, 2 toolboxes, 2 spare tire racks, 12 sets of container locks, 3 Fuhua 13T axles, 28T single action support legs

　　45 foot skeleton car standard configuration:

　　The longitudinal beam height is 480mm, the upper wing plate is 14mm, the lower wing plate is 16mm, the web plate is 8mm, there are 2 toolboxes, 2 spare tire racks, 8 sets of container locks, three Fuhua 13T axles, and 28T single action support legs

　　48 foot skeleton car standard configuration:

　　The longitudinal beam height is 480mm, the upper wing plate is 14mm, the lower wing plate is 16mm, the web plate is 8mm, there are 2 toolboxes, 2 spare tire racks, 8 sets of container locks, three Fuhua 13T axles, and 28T single action support legs

　　53 foot skeleton car standard configuration:

　　Longitudinal beam height 500mm, upper wing plate 14mm, lower wing plate 16mm, web plate 8mm, 2 toolboxes, 2 spare tire racks, 8 sets of container locks, 3 Fuhua 13T axles, 28T single action support legsConsultation Hotline

　　A suction truck is a new type of environmental sanitation vehicle that collects, transfers, and transports sludge and sewage to avoid secondary pollution. The suction truck can self suction and discharge, with fast working speed, large capacity, and convenient transportation. It is suitable for collecting and transporting liquid substances such as feces, mud, and crude oil. The sewage suction truck adopts domestically advanced vacuum pumps with high suction power and long suction range, which are particularly suitable for the suction, transportation, and discharge of sediment in sewers, especially for larger objects such as mud, silt, stones, bricks, etc. The dedicated part of the sewage suction truck consists of a power take-off, a transmission shaft, a vacuum sewage pump, a pressure tank, a hydraulic part, a pipe network system, a vacuum pressure gauge, a fecal window, a hand washing device, etc. The vehicle is equipped with a high-power vacuum sewage pump and a hydraulic system. The tank head is formed by one-time die-casting, the tank body can be opened backwards, and the double top self dumping is available. The dirt inside the tank can be directly dumped through the back cover, which has the characteristics of high vacuum degree (greater than the suction force of the suction truck), large tonnage, high efficiency, and wider application. Due to the continuous immersion of the fecal suction hose on the liquid surface, the air inside the fecal tank becomes thinner and thinner as it cannot be replenished. As a result, the pressure inside the tank is lower than atmospheric pressure, and the fecal liquid enters the tank through the fecal suction hose under atmospheric pressure. Or due to the proximity of the siphon tube to the bottom of the tank, when air is continuously discharged into the manure tank, it is compressed because there is no way out, causing the pressure inside the tank to be higher than atmospheric pressure. The manure liquid is discharged outside the tank through the siphon tube and suction hose under the action of compressed air.

　　The sewage suction truck has the characteristics of high suction efficiency, self suction, self discharge, and direct injection. Filling time of manure tank: ≤ 5 minutes, suction stroke: ≥ 8m. It has the characteristics of long service life, fast working speed, easy operation, and convenient transportation.

　　The sewage suction truck is mainly used to clean the sediment in urban sewers, pipelines, and clear dead corners of mud ditches. It can also be used to clean industrial drainage pipelines, walls, etc. It can also be used for watering, transporting water, and flushing highways. In emergency situations, it can be used for firefighting.

　　：

AfterSalesService :

• Dangerous goods skeleton semi-trailer