38 cubic meter tax-free bulk cement tanker truck quotation

Description :

　　Bulk cement tanker Powder material transport vehicleCharacteristics of Tank Semi Trailer Series ProductsPowder material transport semi-trailer

　　A semi-trailer with a tank type cargo structure. mainUsed for transporting liquids, bulk materials, and bulk cement, etc.

　　1. The tank truck series is divided into oil tank trucks, concrete mixer trucks, powder and bulk cement trucks, water supply trucks, etc.

　　Oil tank semi-trailer

　　2. The tank body is manufactured using advanced processing techniques through three-dimensional design. Chassis adopts special chassis from various manufacturers, with advanced technology and reliable performance

　　Suitable for the transportation and pneumatic unloading of dry materials such as fly ash, cement, lime powder, and ore powder with particle diameters not exceeding 0.1mm. When the vertical height of the unloading reaches 15m, the horizontal conveying distance can also reach 5m.

　　The semi-trailer powder material transport vehicle uses its own engine power to drive the on-board air compressor through a power take-off, and compresses the air through

　　The pipeline is sent into the gas chamber at the bottom of the sealed tank to suspend the cement on the fluidized bed into a fluid state. When the pressure inside the tank reaches the rated value

　　When setting the value, open the discharge butterfly valve and transport the fluidized cement through the pipeline.

　　Made with advanced domestic technology, the design is innovative, sturdy and durable. The airbag type has a large load-bearing capacity, fast unloading speed, and small residual amount.

　　In order to adapt to the current weight based charging and strict dual governance transportation environment, and meet the needs of users for vehicles with "light" weight, load-bearing capacity, and profitability, the company imported Swedish high steel lightweight rail semi-trailer. After repeated and extensive experiments, it was grandly launched!

　　Detailed introduction of product features:

　　◆ Innovative Design: This light semi-trailer is a new type of light vehicle that has undergone multiple innovations through FEA (Finite Element Analysis) analysis, drawing on advanced design concepts from both domestic and international sources, based on a thorough understanding and analysis of transportation environments in various regions. Convex and concave penetrating beam structure.

　　Shanghai Baosteel height steel: The web, bottom, and key parts are made of advanced technology standard height steel. ◆ Light weight: Adopting a convex concave through beam structure, and carrying out multiple local weight reductions while ensuring structural integrity, the weight is light.

　　◆ Bearing capacity: By adopting Shanghai Baosteel's high steel and structural innovation, the same bearing capacity is maintained while reducing self weight.

　　Suitable for the current transportation environment of weight based charging. In order to adapt to the current transportation environment of weight based charging and strict dual governance, and meet the needs of users for vehicles with "light" weight, load-bearing capacity, and profitability, the company has designed a lightweight semi-trailer using Shanghai Baosteel height steel. After repeated and extensive experiments, it has been grandly launched!

　　The integrated tank body has the characteristics of high integrity, good rigidity, good pressure resistance, and good performance.

　　The fluidized bed inside the tank is designed scientifically and arranged reasonably, which can effectively shorten the unloading time to 1.4T/min, improve the capacity utilization of the tank, and reduce the residual ash rate, which is 0.2%. The tank body of the powder material transport vehicle adopts a double cone inward tilting horizontal structure, with double tube intake and double tube feeding. Its discharge speed and residual rate meet the industry standard requirements.

　　1. Frame and Traction Pin: The frame is a space frame type low-alloy steel welded structure, which is welded from two T-shaped longitudinal beams and crossbeams to support the load. There are traction pins and traction pin plates connected to the tractor under the front of the frame, with a specification of 90. The traction pin is assembled for easy replacement. There are air brake connectors and wire connection sockets installed on the front crossbeam of the frame. The frame is equipped with lighting or signal devices on the front, back, and sides.

　　2. Suspension system: The lower part of the longitudinal beam is welded with a suspension device support, and the lower part of the front is supported by a support device support. The suspension system is a three-axis steel plate spring suspension, which is used to support loads and absorb driving vibrations. The steel plate spring suspension system is fastened to the axle body with U-bolts. The parking brake is controlled by an energy storage spring brake system, and the wheel brake also serves as the parking brake. Use this device when parking or on a slope.

　　3. Axle and wheel: The suspension system is equipped with three identical axle assemblies. The axle is a square tube axle, with a platform for installing steel plate spring suspension and a bracket for installing brake chambers on the axle body. The axle head is used to install wheels, hubs, brakes, etc.

　　4. Supporting device: In order to ensure reliable parking of the semi-trailer after it leaves the index vehicle, two supporting devices with left and right linkage or left and right single action are installed at the front end of the frame. It consists of a screw transmission mechanism, a bevel gear transmission mechanism, a dual speed gearbox, a transmission rod, an operating handle, etc. When the handle is pushed in, rotating it can achieve high-speed lifting, and when the handle is pulled out, rotating it can achieve low-speed lifting. After the base touches the ground, only low-speed gear can be used for lifting.

　　5. Brakes and their operating devices: The semi-trailer adopts a dual tube pneumatic braking system and is equipped with an anti lock braking system (ABS). The driving brake system mainly consists of air joints, inflation pipelines, operating pipelines, emergency relay valves, air reservoirs, brake chambers, and wheel brakes. The air joint of the inflation pipeline is connected to the tractor air reservoir, and the air joint of the operation pipeline is connected to the brake valve of the tractor. When the semi-trailer brakes, all brake chambers act simultaneously. When the driver steps on the brake pedal, the various brake chambers of the semi-trailer are activated to achieve normal foot braking. When the charging pipe leaks or bursts, or when the tractor suddenly disengages from the semi-trailer while driving, causing the pipeline to detach, the semi-trailer can automatically brake. When the car train stops and the tractor and semi-trailer are separated, the semi-trailer can brake on its own. If the parking time is short, the parking brake does not need to be used.

　　6. Electrical system: The semi-trailer is equipped with an internationally recognized electrical system that is compatible with the tractor. There is an electrical connector socket on the front crossbeam of the frame. There are brake lights, turn signals, parking lights, reverse lights, license plate lights, fog lights, and triangular reflectors at the rear of the frame. There are front position lights, side marker lights, and ABS indicator lights at the front and on both sides. The voltage of various lighting fixtures is 24V DC. 7. Tank body: The tank body is a fully metal welded part, which is a sealed container for loading materials made of ordinary carbon structural steel plates with flow circle butt joints and stamped heads welded together. The volume is 55m3. There are manholes and walkways above for loading, unloading, and maintenance personnel to enter the tank. There is a fluidized bed air chamber inside the tank. The air chamber is composed of a skateboard and an air bag, so that compressed air can be discharged from the discharge pipe after the powder material is fluidized through the air bag. The head is cut using a plasma CNC cutting machine, and then spun once using a simulated edge spinning machine to increase the degree. It is not allowed to manually knock the flange to avoid material damage;

　　8. External power and air compressor: external Weichai 4100 engine and Wuhu 10.00 vehicle air compressor unit,

　　Ensure sufficient air pressure during vehicle unloading.

　　Lightweight barrier board semi-trailer vehicle weightfive point twoTon, PaulafiftyTon of cargo, light warehouse, semi-trailer, overall weight of the vehiclefive point sixTonne Bao LafiftyTo reduce the cost of purchasing cars for enterprises and car owners, we support the exchange of old for new and heavy vehicles for light vehicles. Please feel free to inquire

　　Firstly, thank you for choosing and using various specialized vehicle products produced and sold by our company. Sales Service Commitment: Pre sales Service: Before confirming your purchase intention, you can contact me to explain your purchase standards and requirements, and I will contact you. In sales service: If you confirm the product, we will start the production process with your bank receipt. If you have any questions during the process, you can contact me and I will provide detailed answers. After sales service: We promise that the company is responsible for the product; Service satisfies customers. Adhering to the quality policy of "quality, customer first", expanding the market with quality and seeking benefits from management, and taking customer satisfaction as our pursuit, this is the key to maintaining market share in the fierce market competition. Our factory adheres to its business philosophy of "customer-centric, serving the public", and has established an eternal and sincere partnership with customers with a positive, serious, responsible, and loyal attitude towards product quality and after-sales service. We have established a good corporate image with excellent service. Quality policy: Create a service-oriented enterprise; Create products that satisfy users; Establish domestic brands. Quality objective: To implement the GB/T9001-2000 standard, establish, maintain and continuously improve the quality management system; The first inspection pass rate of the entire vehicle is ≥ 92%, with an annual increase of more than 1% within three years; Vehicle factory qualification rate; Customer satisfaction rate ≥ 90%, with an annual increase of over 1% within three years. Quality commitment: The company is responsible for the product; Service satisfies customers. In order to provide you with more guaranteed product quality and better after-sales service, we hereby solemnly promise: Technical training program: The bidding supplier is responsible for providing free training to the equipment users at the user's location before delivering the vehicle to the user for use. The training mainly focuses on how the driver can operate the hydraulic system and special devices to familiarize themselves with the basic principles of this type of vehicle and their ability to handle general faults.

AfterSalesService :

• 38 cubic meter duty-free bulk cement tanker truck