Liangshan Container Rear Flip dump Truck Manufacturer

Description :

　　For more discounts, please contact us by phone. We will take the time to serve you

　　twenty-fourHour by hour phone connection, customers can call you directly without worrying

　　Our service tenet is to survive with quality and ensure reputation. Honesty in treating people, flexible management, high quality, and emphasis on efficiency. Our company does not seek to make money, but only requires customers to use our products with confidence. We welcome new and old customers to visit our company for inspection. We are dedicated to serving you. Liangshan Yalong Special Purpose Vehicle Co., Ltd. is a national manufacturer of special purpose vehicles, located in Liangshan, Shandong, the city of special purpose vehicles in China, covering an area of over 500 acres. The company's vehicles do not pass through any dealers, completely. Low cost product quality assurance. Customers can personally come to the company for inspection, and we are dedicated to serving you.

　　★ Liangshan Tiantong Sales Headquarters dump truck technology

　　1. The material of the dump truck compartment can be carbon steel or stainless steel.

　　2. The dump truck can be equipped with U-shaped and V-shaped buckets.

　　3. Depending on the vehicle model, the hydraulic top of the dump truck can be selected from single top, double top, and front push top.

　　4. The sealing form of the dump truck can be optionally equipped with a sealing cover to fully seal the carriage. The sealing cover forms are manual and hydraulic.

　　★ Explanation of dump trucks from Liangshan Tiantong Sales Headquarters

　　1. The dump truck series products produced by Tiantong Automobile Company. This product is mainly used for transporting various construction materials such as ash, sand, stone, soil and other bulk building materials in municipal and large-scale industrial and mining departments. It can also be used to transport ore or coal in mines or coal mines, and can be modified into a covered and sealed type according to user requirements.

　　The dump truck produced by Tiantong Automobile Company consists of a hydraulic system and an operating system. The lifting oil cylinder (2 units) is a double acting hydraulic cylinder produced by a domestic hydraulic component manufacturer.

　　3. The dump truck can flip itself and unload the items inside the carriage. The flipping cycle time is less than one hour. The characteristic of this vehicle is that it is suitable for loading and unloading a large amount of goods, and can be operated in conjunction with a loader for large-scale transportation, fully improving the transportation capacity of the vehicle.

　　4. Our factory has fully passed ISO9001-2000 international quality system certification, and our products have fully passed 3C certification. We are a domestic brand and a trustworthy product in Hubei Province.

　　★Our service commitment is: we have a strict quality system and a rigorous after-sales service guarantee,twenty-fourTimely delivery, allowing users to buy with peace of mind and use with peace of mind.

　　Our company's development policy: We don't care about how much a car earns, we only care about how many customers one customer can bring. We allow customers to buy affordable cars at low prices, providing great convenience in both price and quality! Our business will provide customers with thoughtful service!

　　factory Address: Shandong Liangshan Special Vehicle Industrial Park

　　weLiangshan Tiantong Automobile Co., LtdThe lightweight semi-trailer used is made of high steel, advanced technology, and designed to create a new generation of lightweight semi-trailer; By using high-strength steel and optimizing the design of the semi-trailer, the self weight of the semi-trailer can be reduced by more than 1 ton without changing the load-bearing capacity of the semi-trailer. This can effectively reduce the weight of the semi-trailer by more than 1 ton, and can be used for tank trucks, tank trucks, tank semi trailers, tank bulk dump trucks, tank bulk dump trucks, and manufacturers of dump semi trailers

　　Tank type dump trucks achieve efficient transportation of dry mixed mortar. The dry mixed mortar that has been produced and proportioned is transported to the construction site by a dry mixed mortar transport vehicle. Pneumatic conveying is used to reduce the dry mixed mortar and deliver it to a dedicated mortar tank. At the site, only water needs to be added for mixing, and construction projects such as walls can be carried out to avoid environmental pollution such as dust and noise caused by on-site mixing, thereby improving the construction environment and enhancing construction quality. The key technology is to solve the segregation problem of dry mixed mortar during loading, transportation, and unloading, ensuring the quality of dry mixed mortar.

　　1. The lifting dry mixed mortar transport vehicle is developed based on the bulk transportation of granular materials, with structural characteristics:

　　Hydraulic air suspension cone material bin unloading system, no segregation, fast unloading speed (1.6T/min), extremely low residual ash rate (0.2 ‰)

　　2. Unloading principle:

　　Unloading is the process of using a hydraulic lifting cylinder to stack the entire material towards the cone position of the tank body. A special air flotation unloading device fluidizes the mortar within a local range of the cone (with a diameter of 20CM), and compressed gas forms an approximately spiral "air knife" at this position to gradually peel off and fluidized the material, while forming secondary mixing. The landscape road is quickly unloaded, avoiding the separation of the mortar due to large-scale and long-term agitation, and the air consumption is small, with a residual ash rate of almost 0 (0.2 ‰).

　　3. Equipped with a dedicated unloading device (quick release valve), it achieves rapid cleaning of residual materials, effectively solving the problem of mixing caused by transporting residual materials in each vehicle, and ensuring the quality of dry mixed mortar.

　　4. In order to meet the requirements of domestic standards for the technical quality of dry mixed mortar, the dry mixed mortar transport vehicle is equipped with a dedicated fast sampling device, which provides a guarantee for real-time monitoring and detection of the quality of dry mixed mortar.

　　Due to the above characteristics, it is easy to transport ordinary mortar, special mortar, or dry sand in production materials.

　　Shandong Liangshan Automobile Manufacturing Co., Ltd. is a nationally approved manufacturer of trailers and special-purpose vehicles, and is one of the first private enterprises to enter the management of the automobile "Announcement". The company is a large-scale automobile modification enterprise that integrates product design, scientific research and development, production and sales. It has companies in automobile production, automobile trade, automobile parts production, etc. Its leading products include“Liangfeng Brand”Various specialized vehicles and special vehicles such as semi-trailer, dump truck, oil tanker, powder material transport vehicle, road clearing vehicle, bulk cement truck, concrete pump truck, concrete mixer truck, etc.

　　The company currently occupies an area ofone thousand and one hundredMu, total assetsfour point sixRMB100mn Current employees of the companyone thousandMore than people with senior professional titlesone hundred and twenty-eightWe have domestic CNC cutting machines, automatic welding machines, large bending machines and splicing machines, automatic welding and flipping machines for tank bodies, as well as large whole vehicle through shot blasting machines in the provincetwenty-oneDomestic advanced production lines such as Mi Da spray painting, baking paint room, and Swiss four-wheel alignment device, as well as modern tooling and testing equipmentone thousand and two hundredYutai set. The products are sold to more than 20 provinces in China, and some products are exportedfiveA pioneer in China's trailer (special vehicle) production base and a leading backbone enterprise in Shandong Province's product production base.

　　The company has successively passed the China Quality Certification CenterCCCCertification andISO9001：two thousand and oneQuality management system certification, designated production enterprise for pressure vessel safety, and tank truck have obtained national production license.“Liang Feng”The license plate has obtained the trademark of Shandong Province, the semi-trailer, bulk cement truck, and oil (refueling) semi-trailer have obtained the product of Shandong Province, and the road clearing vehicle has obtained the“Shandong Province's scientific and technological achievements”The company has been recognized as a member of Shandong Province“High tech enterprises”Received sales revenue and paid profits and taxes from Shandong Machinery Industry Office“100enterprise”The“Shandong Province Consumer Satisfaction Unit”Jining City“Meritorious Private Enterprise”Waiting for honorary titles.

　　The above is the patented product of Liangshan Liangfeng, which is a semi-trailer for transporting bulk cement after flipping Powder material semi-trailer A detailed introduction to tank trucks, including Liangshan Liangfeng's patented product of bulk cement and semi-trailer for overturned transportation Powder material semi-trailer The price, model, pictures, manufacturer and other information of the tanker truck!Tank dump semi-trailer, tank dump truck, dump tank truck

AfterSalesService :

• Container overturning and self dumping