International standard container skeleton semi-trailer lock

Description :

　　Container skeleton semi-trailer, container transport semi-trailerContainer semi-trailerContainer skeleton quotation

　　container flatbed Dragon bone frameskeleton carfortyFoot skeleton Goose neck skeletonContainer semi-trailer

　　Skeleton container transport vehicles are specifically designed for transporting various containers such as 20, 40, 45, 48, 53 feet, etc

　　Skeleton container transport vehicles are a type of semi-trailer frame for container transportation, and there is also a type of flatbed frame. The skeleton type car driver is welded from longitudinal beams, transverse beams, and front and rear end beams. The longitudinal beams are made of 16Mn steel plates and welded into an I-shape (with main dimensions of 450 and 500) by submerged arc welding. The transverse beams are stamped into groove shapes from steel plates, and the front and rear end beams are welded rectangular sections. The middle container locking device is equipped with an integral long crossbeam to improve the load-bearing capacity of the container locking device. The difference between flat panel and skeleton style is that flat panel adds borders and patterned flooring. A container compression device is installed on the frame, which can load two standard containers of 40 feet and 20 feet. The four container tightening devices at the front and rear are fixed structures, while the middle container tightening device is a concealed structure. When loading containers, the middle container locking device can be lowered below the arrival platform level as needed.

　　Conventional recommended vehicle configuration:

　　Standard configuration of 40 foot skeleton car:

　　Longitudinal beam height 480mm, upper wing plate 14mm, lower wing plate 16mm, web plate 8mm, 2 toolboxes, 2 spare tire racks, 12 sets of container locks, 3 Fuhua 13T axles, 28T single action support legs, 12 national warranty 12R22.5 vacuum tires, 2 chain spare tire racks

　　45 foot skeleton car standard configuration:

　　The longitudinal beam height is 480mm, the upper wing plate is 14mm, the lower wing plate is 16mm, the web plate is 8mm, there are 2 toolboxes, 2 spare tire racks, 8 sets of container locks, 3 Fuhua 13T axles, 28T single action support legs, 12 national warranty 12R22.5 vacuum tires, and 2 chain spare tire racks

　　48 foot skeleton car standard configuration:

　　The longitudinal beam height is 480mm, the upper wing plate is 14mm, the lower wing plate is 16mm, the web plate is 8mm, there are 2 toolboxes, 2 spare tire racks, 8 sets of container locks, three Fuhua 13T axles, 28T single action support legs, 12 national warranty 12R22.5 vacuum tires, and 2 chain spare tire racks.

　　53 foot skeleton car standard configuration:

　　The longitudinal beam height is 500mm, the upper wing plate is 14mm, the lower wing plate is 16mm, the web plate is 8mm, there are 2 toolboxes, 2 spare tire racks, 8 sets of container locks, three Fuhua 13T axles, 28T single action support legs, 12 national warranty 12R22.5 vacuum tires, and 2 chain spare tire racks.

　　Shandong Liangshan Light Trailer Factory. Various second-hand tractor heads and new cars, installment services, etc.

　　Our company produces various types of semi trailers, including full trailers, box trucks, and moreLow flatbed semi-trailerOur factory adopts Shanghai Baosteel BS700 and 960 high steel precision design, with light body weight and high load-bearing capacity.

　　Specifications

　　17.5mx3m with a self weight of 6.2 tons 35 tons of cargo transported by Paula, with a self weight of 6.8 tons and 50 tons of cargo transported by Paula, with a self weight of 8.2 tons and a Paula 360 excavator

　　13mx2.5mx2m with a self weight of 6.2 tons,

　　Baola stores 50 tons of goods

　　13mx2.5mx0.6m, with a self weight of 5.8 tons, and 50 tons of cargo to be transported by pull

　　The above models can all be exchanged for new ones, and the market that wins the brand quality with honesty and integrity is open to new and old customers to come and purchase.

　　Liangshan Yalong Machinery Manufacturing Co., Ltd. is a private comprehensive processing company that integrates automobile manufacturing and spare parts production, scientific research, processing, and sales. The company is located in the Quanpu Town Industrial Park in Liangshan County. Our company is a designated specialized vehicle production and modification unit announced by the National Development and Reform CommissionISO9001-2000Certification and3cCertification, with comprehensive viewing methods, has established a relatively complete pre-sales, in sales, and after-sales service system.

　　Special Purpose Vehicle Co., Ltd. produces and exports various trailers, semi trailers, tank trucks, vehicle transport vehicles, and special purpose vehicle companies (National Import and Export Corporation of the Ministry of Commerce). It is a designated production company for special purpose vehicles as announced by the Ministry of Commerce and the Ministry of Industry and Information Technology. It is a joint venture and cooperative company of China Heavy Duty Truck Group. The company's leading products include over a hundred types of products such as low flatbed, fence board, box type, warehouse rack semi-trailer, tank type vehicle, dump truck, and special vehicle, and accepts modification and planning services for specialized vehicles and special vehicles. Our company has always been committed to providing customers with high-quality road transportation products. We are a well-known domestic specialized vehicle manufacturer that integrates scientific research and development, production, and sales.

　　We are skilled in manufacturing and specialized in research and development, with domestically leading manufacturing equipment and production skills. Our product inspection line and comprehensive computer-aided planning system have enabled our company's products to gain the top national recognition in ChinacccProduction certification and manufacturingIS09001International Quality System Certification and Obtainedtwo thousand and fiveThe National Special Purpose Vehicle Quality and Stability Qualified Company. For many years, our company has produced "Liangfeng brand" semi trailers and tank trucks,Vehicle transport vehicle,van ,Dump truck,Full trailer,Warehouse grate semi-trailer,Low flatbed trailer,Chemical liquid transport semi-trailer,Container semi-trailer.

　　 Looking forward to receiving inquiries from a wide range of friends!

　　Rear overturned container semi-trailer, container flatbed rear overturned dump truck, rear overturned dump flatbed truckDomestic oil cap Guangdong Fuhua 13 ton 16 ton piece, two or three pieces, eight or twelve 1100 tires (triangle, Linglong, double star, double money) can be selected Sub frame I-beam Can reach a height of 5-6 meters The entire vehicle body is made of steel, advanced technology, and strict production processes. The vehicle structure is reasonable, the performance is reliable, the operation is simple, and the appearance is beautiful. The semi-trailer frame is of a through beam structure, and the longitudinal beam adopts a straight or goose neck type. The web plate height ranges from 400mm to 550mm and is welded with manganese plate. The longitudinal beam is welded with automatic submerged arc welding, and the frame is shot blasted. The crossbeam penetrates the longitudinal beam and is welded as a whole. The suspension adopts a non independent steel plate stamping rigid suspension (optional air suspension) consisting of a series of steel plate springs and suspension supports, with a reasonable structure and high stiffness, used to support loads and reduce impacts. This product has reliable quality and wide applications, and has become a model for medium and long-distance vehicles. Mainly applicable to the medium to long distance transportation of medium to heavy and bulk goods, and the suitability of the transported goods. The entire vehicle is optimized using advanced computer-aided design software, and the frame is subjected to finite element analysis based on the vehicle's load-bearing quality requirements for scientific design and reasonable load distribution. The axles, tires, and other purchased components are all products produced by domestic and foreign manufacturers.

　　hydraulic system

　　The front hydraulic lifting system is equipped with domestically produced front hydraulic lifting systems or imported brands such as Haiwo; The abdominal hydraulic lifting system includes F-series, T-series, and multi cylinder side unloading series, selected from domestic brands; The hydraulic system technology is mature, the structure is reasonable, and the reliability is high; Pneumatic lifting limit, easy to operate. 2. Characteristics of the carriage

　　(1) The standard configuration of the side panels, front panels, and rear panels of the heavy-duty series carriages is in the form of a Tian character. The carriage body adopts a wide reinforced structure, with high rigidity, impact resistance, and beautiful appearance.

　　(2) The carriage is equipped with anti expansion devices, and the rear door is optionally fitted with double hinged hinges to effectively prevent deformation. The rear door locking mechanism has strong locking force and good reliability, and is equipped with an optional hook.

　　(3) The longitudinal beam of the subframe is a rectangular structure, and the subframe, oil cylinder bracket, etc. are made of Q345 material, with high rigidity and good fatigue resistance; The cross beam is installed at the rear of the subframe of the long carriage model, which has good torsional resistance; The rear flipping mechanism is a wide tail structure with good lifting stability; The front dump truck has a low center of gravity and good driving stability.

　　(4) We have specifically developed a series of models with heated floor for cold regions.

　　3. Sandblasting treatment of paint raw materials, components, and parts, pre spray primer, adhesion, and long-lasting gloss.

　　In order to adapt to the current weight based charging and strict dual governance transportation environment, and meet the needs of users for vehicles with "light" weight, load-bearing capacity, and profit maximization, the company imported Swedish high steel lightweight rail semi-trailer. After repeated and extensive experiments, it was grandly launched!

　　Detailed introduction of product features:

　　◆ Innovative Design: This light semi-trailer is a new type of light vehicle that has undergone multiple innovations through FEA (Finite Element Analysis) analysis, drawing on advanced design concepts from both domestic and international sources, based on a thorough understanding and analysis of transportation environments in various regions. Convex and concave penetrating beam structure.

　　Shanghai Baosteel height steel: The web, bottom, and key parts are made of advanced technology standard height steel. ◆ Light weight: Adopting a convex concave through beam structure, and carrying out multiple local weight reductions while ensuring structural integrity, the weight is light.

　　◆ Bearing capacity: By adopting Shanghai Baosteel's high steel and structural innovation, the same bearing capacity is maintained while reducing self weight.

　　Suitable for the current transportation environment of weight based charging. In order to adapt to the current transportation environment of weight based charging and strict dual governance, and meet the needs of users for vehicles with "light" weight, load-bearing capacity, and profit maximization, the company has designed a lightweight semi-trailer using Shanghai Baosteel high steel. After repeated and extensive experiments, it has been grandly launched!

AfterSalesService :

• Skeleton semi-trailer