Huai'an/Siyang/Shuyang opgw-24B1-40 optical cable and conductor manufacturers, national standard power fiber prices

Description :

　　1. Stainless steel tube optical unit: The stainless steel tube is made by winding and welding stainless steel strips, containing optical fibers and fiber paste. The outer surface of the steel tube is coated with a layer of anti-corrosion cable paste to prevent electrochemical corrosion.

　　2. Fiber optic: Fiber optic is identified by chromatography and color ring. Number of fiber cores per steel pipe: 24 ITU-TG.652 or G.655 fibers.

　　3. (Metal) wire: The optical unit is twisted with aluminum clad steel wire and aluminum alloy wire to form a cable, in order to meet the necessary strength and conductivity and further protect the optical fiber. Aluminum clad steel wire complies with the IEC1232 (International Electrotechnical Commission) standard (equivalent to GB/T17937-1999). Aluminum alloy wire complies with the IEC104 (International Electrotechnical Commission) standard (equivalent to JB/T8134-1997)

　　4. Characteristics of layer twisted OPGW: The optical fiber is protected inside a sealed and waterproof stainless steel tube, with an aluminum clad steel monofilament at the center. The stainless steel tube and monofilament are twisted in layers, and one (or more) layer of monofilament is twisted on the outside. The layer twisting type can be twisted to produce OPGW with larger cable diameters, while SFPOC can be twisted to produce OPGW with 2 or 3 layers, meeting the requirements of large span and large short-circuit current capacity.

AfterSalesService :

• opgw-24B1-40