Integrated buried box pump for sports arena fire water tank pump integration

Description :

Integrated buried box pump Integrated buried box pump: Firstly, assemble and combine the molded plates, using bolts and sealing rings to seal and connect the plates. Tighten and splice the bolts according to the dimensions of the water tank, length, width, and height; After assembling and combining several large board surfaces, the bottom plate assembly is carried out. After connecting the bottom plate, the wall panels and bottom plates are connected. The bolt connection is to first code one side at a time on the bottom plate of the water tank. After the four walls are coded, adjust the connection by pressing the edges. The relative angle of the re measurement is generally not more than 2mm, and it is required to be in a straight line. The four corners should be perpendicular to the connection between the bottom and the wall. 2. Connect the top and wall again, and the edges should be basically on the same horizontal line. After the water tank body is connected and sealed, then open the inlet, outlet, overflow, sewage, fire hole, and install the escalator near the manhole; After all the above work is completed, the site is ready for water testing. The integrated water tank of the buried box pump will be filled with water for pressure testing, and the sealing around the water tank will be checked for any leakage or seepage.

Integrated buried box pump The integrated buried tank pump is assembled according to the atlas and technical requirements, and is assembled with Φ 1030 hot-dip galvanized screws and environmental water resistant and anti-aging adhesive strips. After the water tank is assembled and formed, the tie bars and top columns are installed. The reinforcement is made of hot-dip galvanized steel with a diameter of 48, and is installed horizontally and vertically at a distance of 1 meter. The top pillar is sealed with 4 hot-dip galvanized pipes of diameter 48 evenly distributed per square meter. The integrated pump station of buried box pump is installed according to the pump station, and the screws on the surface of the pump room are checked and accepted after installation to ensure that all fasteners are tightened without omission.

AfterSalesService :

• Integrated buried box pump