Integrated manufacturer of buried box pumps, integrated non floating pump station for buried box pumps

Description :

Integrated buried box pump Integrated characteristics of buried box pump: The integrated fire pump station of buried box pump uses new materials, new technologies, and new processes to develop cost high-tech products. It integrates a water tank and a pump room, with a novel concept and reasonable design, and has been used by thousands of users across the country. The integrated construction period of buried box pumps is short and the service life is long: corresponding water tanks and water pumps can be configured according to project requirements, and the water tank capacity and water pump model are configured based on the calculation results of the owner. The integration of buried box pumps requires less material and saves consumables. In order to achieve strength, we will cause deformation of the material. The stainless steel water tank produced by using this process has a particularly smooth and three-dimensional appearance. The integrated maintenance of buried box pumps is convenient, and the operation is stable and reliable. It is a substitute product for underground concrete water tanks. Low cost, does not occupy ground area, can be placed in the owner's open space, under the green belt, or in scattered open spaces. Made with anti-corrosion grade, durable and long-lasting.

Integrated buried box pump The integrated buried tank pump is assembled according to the atlas and technical requirements, and is assembled with Φ 1030 hot-dip galvanized screws and environmental water resistant and anti-aging adhesive strips. After the water tank is assembled and formed, the tie bars and top columns are installed. The reinforcement is made of hot-dip galvanized steel with a diameter of 48, and is installed horizontally and vertically at a distance of 1 meter. The top pillar is sealed with 4 hot-dip galvanized pipes of diameter 48 evenly distributed per square meter. The integration of buried box pumps is based on the installation of pump rooms and screws on the surface of the pump rooms. After installation, inspection and acceptance are carried out to ensure that all fasteners are tightened without any omissions.

AfterSalesService :

• Integrated buried box pump