Integrated buried box pump, Hefei buried fire booster water supply equipment, anti floating buried water tank

Description :

　　The specific implementation of the integrated technology scheme for buried box pumps is as follows: 1. Establish a complete box pump integrated non floating pump station system, which includes stainless steel water tanks, fire hydrant pump rooms, sprinkler pump rooms, channel steel profiles, connecting bolts, pits, and embedded bolts, etc; 2. Consider the pit as a whole consisting of a side wall foundation, a reinforced concrete slab foundation at the bottom, and a sand and gravel cushion layer placed under the reinforced concrete slab foundation; The third is to fasten the fire hydrant pump room and sprinkler pump room to the reinforced concrete slab foundation through embedded bolts embedded in the foundation, and place them in a stainless steel water tank. This structural design has several obvious features: firstly, the stainless steel water tank is composed of a top plate and side plates; The second is that the channel steel profile is connected to the bottom surface of the four wall side plates of the stainless steel water tank through connecting bolts, and a rubber sealing strip is provided between the two; 3. A concave rectangular plane is provided on the reinforced concrete slab foundation, with a length greater than the length of the stainless steel water tank and a width greater than the width of the stainless steel water tank; Thirdly, the channel steel profile is fastened to the concave plane of the reinforced concrete slab foundation through pre embedded bolts, and a rubber sealing strip is provided between the two; The fourth is that the concave plane and concave side of the reinforced concrete slab foundation are filled with sealant between the channel steel profile, and the sealant is silicon copper sealant or silicon steel structural adhesive; The upper end of the pre embedded bolt connecting the groove steel profile and the concave plane of the reinforced concrete slab foundation is submerged in the sealant.

Integrated buried box pump The integrated pump room with buried box pump houses supporting equipment such as control cabinets, dehumidifiers, and fire pumps. The pump room adopts 24-hour passive ventilation, is equipped with drainage facilities, and is coated with thin fireproof coating to meet the fire resistance level of Grade II. We use industrial grade dehumidifiers that operate fully automatically to ensure dryness inside the pump room; The water pump adopts a vertical pump, which is installed in a dry manner for easy maintenance. It adopts a self-priming suction method and meets the requirements of relevant specifications; The control cabinet strictly follows the requirements of the new consumer standard GB50974-2014, and is equipped with dual power supplies. The operating data can be recorded and called. The pipelines and valves are connected by clamps, which are easy to install and can be used by connecting the water outlet. The accessories meet the standards.

AfterSalesService :

• Integrated buried box pump