Design Requirements for Taiyuan Roof Stainless Steel Fire Water Tank
Design Requirements for Taiyuan Roof Stainless Steel Fire Water Tank

Design Requirements for Taiyuan Roof Stainless Steel Fire Water Tank

Category:

Environmental Protection/Raw water treatment equipment/Water supply equipment

Model:

Various models of water tanks from Jinze

Brand:

Kanazawa

brand:

Kanazawa

model:

Various models of water tanks from Jinze

purpose:

Fire water supply

Processing & Customization:

yes

Equipment material:

stainless steel

Place of Origin:

Yancheng, Jiangsu

manufacturer:

Yancheng Jinze Water Supply Equipment Co., Ltd

Retail Price

18,000.00USD


重量

kg

  • Product Description
  • brand

    Kanazawa

    model

    Various models of water tanks from Jinze

    purpose

    Fire water supply

    Processing & Customization

    yes

    Equipment material

    stainless steel

    Place of Origin

    Yancheng, Jiangsu

    manufacturer

    Yancheng Jinze Water Supply Equipment Co., Ltd

    Description :

      

      · Food grade SUS304 stainless steel water tankThe foundation of stainless steel insulated water tank can be made of concrete strip beams, I-beams or "C" - shaped channel steel. The top diagonal of the stainless steel insulated water tank is equipped with breathable air filtration devices, specifications and quantities

      The device is determined by the manufacturer based on the imported size. Stainless steel insulated water tanks are all reinforced with tension bars inside. Each pipe flange is a 1.0MPa standard flange. When arranging the position of the water tank, designers should refer to

      GB17051-1997 Sanitary Code for Secondary Water Supply Facilities. When the specifications, technical parameters or orientation of the water tank are not suitable for actual use, the design personnel of the stainless steel insulated water tank shall propose and determine them according to actual needs.

      ·1Food grade SUS304 stainless steelThe water tank was filled with water and tested for 48 hours without any leakage;

      ·2. Are there any water leaks at the pipeline connections, valves, and related accessories;

      ·3. Observe whether the water supply system is operating normally;

      ·4. Check if the water disinfection system is working properly

      ·1. Close the inlet valve, open the drain valve, and drain the water from the water tank completely;

      ·2. Enter the water tank by climbing the ladder;

      ·3. Clean the surroundings and bottom of the water tank with a clean mop or cloth. For those with severe bottom fouling, a soft towel and cleaning agent can be used to scrub;

      ·4. Open the inlet valve and rinse the bucket wall and bottom with an appropriate amount of clean water to remove dirt from the drain outlet. Repeat this process multiple times if necessary until satisfactory;

      ·5. Close the drain valve, open the inlet valve, let the water tank refill with water, and the cleaning work is complete

      

    AfterSalesService :

    Key words:
    • Stainless steel fire water tank