Welding method for 304 stainless steel water tank

Description :

　　Welding method for 304 stainless steel water tankIt is a new generation of water tank product after fiberglass water tank. Its product is made of SUS304 stainless steel plate precision molded, with beautiful appearance, economic practicality, and long-lasting main body. stainless steel

　　Compared with other water tanks, water tanks have many advantages such as beautiful appearance, light weight, high strength, corrosion resistance, high temperature resistance, clean water quality, anti-seepage, no secondary pollution of water quality, easy installation, no need for maintenance, and easy cleaning

　　Point.

　　1. Stainless steel water tanks are generally made of SUS304 stainless steel plates, which have stable physical and chemical properties, no pollution to water quality, and ensure clean and hygienic water quality;

　　2. Stainless steel water tank is stamped and formed, with high strength, light weight, clean appearance, and elegant beauty;

　　3. The water tank plate is generally made of high nickel 8.0 or higher 3042B plate, with a smooth and beautiful surface that is easy to clean;

　　4. Due to the dense oxide layer on the surface, it has superior corrosion resistance and good sealing performance;

　　5. High impact resistance and strong seismic performance.

　　1. Welding seam of water supply tank, material: The following is prepared according to the technical parameters of stamping stainless steel water tank. The material of the water tank accessories is made of ordinary carbon steel plate and profiled steel, welded with LB304NI8.0 welding rod, and their quality should meet the requirements of

　　The provisions of the current standards "Carbon Structural Steel" and "Carbon Steel Welding Rod". The splicing of LB304 stainless steel plates on the top, walls, and bottom of the box adopts butt welding (the top plate is an I-type weld, and the bottom plate and side walls are V-shaped welds), while others

　　The welding is a fillet weld, and there should be no cross crossing between the welds, and they should not overlap with the reinforcing ribs. The welding machine is the LB-2-300 stainless steel water tank special welding machine, which has the functions of electric welding and argon welding.

　　2. Full water experiment

　　After the water tank is made, it should be completely filled with water. After 2-3 hours, use a lead hammer weighing 0.5-1.5 kilograms to lightly tap along the weld seam about 150 millimeters on both sides. If there is no water leakage, it is considered qualified; If any leakage is found, it is necessary to

　　Re weld and conduct the experiment again.

　　Folding range

　　Stainless steel water tanks are suitable for large hotels, restaurants, offices, apartments, research and teaching buildings, as well as places with high water quality requirements such as food processing, medical and health care, and electronics industry. (Note: Those with high chloride ion content in water should use with caution)

AfterSalesService :

• 304 stainless steel water tank