Xinjiang Intelligent Box Pump Integrated Pump Station
Category:
Security/Firefighting equipment/Fire pump
Model:
JZ-DM-03
Brand:
Kanazawa
model:
JZ-DM-03
Occasions for use:
Engineering fire pump
purpose:
voltage stabilization
Power source form:
electric motor
Auxiliary features:
Ordinary fire pump/pump set
Export pressure type:
low pressure
Processing & Customization:
yes
Export pressure value:
three hundred
rated flow:
twenty
shaft power:
two hundred and thirty-three
Diameter of suction port:
three hundred
Discharge outlet diameter:
two hundred and fifty
Operating Temperature:
thirty
Place of Origin:
Yancheng, Jiangsu
Is it imported:
No
Item Number:
DM-305
Is it a cross-border source of goods:
No
manufacturer:
Yancheng Jinze Water Supply Equipment Co., Ltd
Retail Price
16,800.00USD
重量
kg
- Product Description
-
model JZ-DM-03
Occasions for use Engineering fire pump
purpose voltage stabilization
Power source form electric motor
Auxiliary features Ordinary fire pump/pump set
Export pressure type low pressure
Processing & Customization yes
Export pressure value three hundred
rated flow twenty
shaft power two hundred and thirty-three
Diameter of suction port three hundred
Discharge outlet diameter two hundred and fifty
Operating Temperature thirty
Place of Origin Yancheng, Jiangsu
Is it imported No
Item Number DM-305
Is it a cross-border source of goods No
manufacturer Yancheng Jinze Water Supply Equipment Co., Ltd
Description :
Xinjiang Intelligent Box Pump Integrated Pump Station Daily cleaning:
1. Close the inlet valve, open the drain valve, and drain the water from the water tank completely;
2. Enter the water tank by climbing the ladder;
3. Clean the surroundings and bottom of the water tank with a clean mop or cloth. For those with severe bottom fouling, a soft towel and cleaning agent can be used to scrub;
4. Open the inlet valve and rinse the bucket wall and bottom with an appropriate amount of clean water to remove dirt from the drain outlet. Repeat this process multiple times if necessary until satisfactory;
5. Close the drain valve, open the inlet valve, let the water tank refill with water, and the cleaning work is complete
The characteristics of buried water tank and integrated buried box pump water tank:
1. Space saving: The water pump and pump chamber are placed in the water tank and fixed on the module of the integrated pump station. Normally, it only occupies a water tank capacity of 0.5-1.5m.
2. Easy to move and disassemble, long service life: Due to the use of prefabricated stainless steel water tanks, the previous welding method has been changed, and screw assembly is adopted, which is highly applicable and easy to install.
3. Easy emptying: Due to the use of a new type of submersible fire pump, it can be directly submerged in water without the need for air discharge. As long as the water tank level is within the specified level, it can directly enter the fire water supply state.
4. Frost free cracking: The fire pump is hidden deep in the water tank and will not be burned out due to freezing in winter.
5. Low noise: Equipped with a water immersed motor and water pump, it greatly reduces the operating noise.
6. Usability: Water immersed motors will not burn out the motor or corrode the motor bearings due to rain or environmental temperature.
7. Convenient: with interfaces to support remote transmission, automatic cleaning, sterilization, and disinfection
AfterSalesService :
Key words:- Intelligent box pump integrated pump station
More Products
