Shandong Airport aircraft garage door, shipyard specific large wind resistant flexible gate

Description :

　　1、 Product introduction: Flexible lift door (stacked hangar door) is a type of flexible soft curtain gate, with two layers of door fabric inside and outside, connected by aluminum crossbeams between the door fabrics, vertically lifting and lowering, with movable guide rails. It is particularly suitable for large factories and hangars with layered roof beams that are not on the same straight line. Flexible lift doors (stacked lift doors) are installed inside the opening and do not occupy indoor space. When opened, the door moves first and then stacks above the opening. When closing, the movable guide rail is first lowered, and then the door cloth is lowered until it is completely closed.

　　2、 Product structure composition: door frame, guide rail (movable guide rail), door fabric, aluminum crossbeam, top frame crossbeam, bottom crossbeam, sealing system, drive and transmission system, electrical control system, safety device, etc.

　　3、 Product features: Lightweight. Compared with other types of doors of the same specifications, the flexible lifting gate (stacking garage door) is lighter in weight, reducing the strength and steel requirements for the top truss of the door opening. Small space occupation. Compared with the Villa style hangar doors of the same specifications, the flexible lift gate (stacked hangar door) is installed inside the opening and stacked above the opening, without occupying indoor space. Multiple movable guide rails can be set up for large-span openings, dividing the entire gate into several independent stacking doors, shortening the span of a single door, reducing the overall thickness of the gate, and further reducing the occupied space. Reasonable layout. The flexible lifting gate (stacking garage gate) is equipped with movable guide rails, which can be set according to the specific situation of the gate. The gate is divided into several stacking gates of different sizes and heights, making the overall layout of the building reasonable and greatly reducing the overall space and cost of the building. High wind resistance. The flexible lifting gate (stacked garage door) has an aluminum crossbeam as a wind resistant framework between the two layers of fabric, and a steel truss at the bottom. By adjusting the thickness and spacing of the crossbeam, it can withstand wind pressure of any strength, making the flexible lifting gate suitable for use in any area. Tensile strength gate. The flexible lifting gate (stacked hangar gate) is made of double-layer polyester fiber cloth with extremely high tensile strength. Equipped with steel wire ropes, it can be used for ultra-high openings such as assembly and storage warehouses. The surface of the door fabric is coated with an ethylene layer, which has waterproof, sun resistant, and flame-retardant properties. It can absorb sound, reduce noise, be flame-retardant, keep warm, prevent mold, and moisture. High security. There are multiple mechanical and electrical protection installations on the gate to ensure the safety of passing personnel, vehicles, aircraft, and other items. The door is equipped with an anti breakage lock to ensure safety. In case the steel wire rope accidentally breaks, the door will quickly get stuck at any position on the guide rail. The movable guide rail is also equipped with anti fall devices, which can ensure that the movable guide rail can be reliably parked at the top of the hole after lifting without falling. The bottom of the gate is equipped with a safety airbag. When the gate encounters an obstacle during descent, it will immediately rebound and rise until it is safely opened. Infrared protection devices can also be installed on the gate.

AfterSalesService :

• Flexible gate hangar door