Xiamen Haicang District turbine hard fast rolling shutter door windproof and moisture-proof

Description :

　　Hard fast doors represent the high level of industrial doors in the world. They have high reliability and practicality, and their high-speed operation can withstand strong convective wind pressure and work efficiency, making them unparalleled in today's industrial field. Reasonable mechanism design reduces their failure rate to a low level. Hard quick doors can prevent outsiders from entering while also resisting weather changes, and can block indoor and outdoor air convection. Therefore, they are an economical choice for frequent access channels and are energy-saving and consumption reducing in industry.

　　Standard configuration of this project product: 1 Emergency power outage activation device; 2. Infrared safety protection system; 3. Operation button box: 4 Contact strip triggered safety bottom edge; 5. Imported technical motors

　　1. Purpose: Used outdoors, it can resist wind, keep warm, be fast, and prevent theft.

　　2. Wind resistance strength: The wind resistance performance is 3.5kPa, reaching the national standard level 6; The wind resistance level is 12. （120km/h）

　　3. Opening speed: Opening speed of 1.2 M/S~2.5 M/S, adjustable;

　　4. Elevate the guide rail: Adopting a double spiral turbine guide rail to make the door run quieter and smoother. The bearing capacity is greatly enhanced, reducing friction and running faster When rolled up, there is no contact, friction, or wear between the door panel and the connecting parts. Smooth and fast opening and closing, improving the service life of the door body;

　　5. Guiding structure: 1. The guiding wheel is treated with polyurethane coated steel, and the bearing is made of domestically produced small bearings with expert human centered bearings. The application of polyurethane makes the operation of the door more quiet and comfortable, and the hinge wheel can open and close 1.5 million times without any faults. 2. The surface of the hinge shaft is QP treated, which can increase the self lubrication and corrosion resistance of the shaft, 3-5 times that of galvanized shafts. 3. The shaft sleeve is made of PEEK (polyether ether copper) material, which does not produce molecular changes in the temperature range of 200 degrees Celsius to minus 60 degrees Celsius (calculated in grams). The wear resistance is 10 times that of copper and it has self-lubricating function, mainly used in.

　　6. Door frame: Made of advanced environmentally friendly Baosteel galvanized sheet, with good forming processes such as precision cutting and CNC bending, a thickness of 3mm, and a protective cover that does not rust for 10 years. The exterior is beautiful, dustproof, and easy to clean.

　　7. Load bearing: Made of advanced environmentally friendly Baosteel galvanized sheet, with good forming processes such as precision cutting and CNC bending, a thickness of 3mm, and a protective cover that does not rust for 10 years. The exterior is beautiful, dust-proof, and easy to clean.

　　8. Door panel material: Aluminum alloy insulated door panel with a thickness of not less than 43mm. The surface is treated with anodizing and organic coloring, and the interior is filled with polyurethane (excluding CFC) industrial insulation material. The internationally advanced bridge cut insulation treatment scheme is adopted, which meets the domestic level 7 energy-saving door and window standards and does not damage the ozone layer. Available in multiple colors including gray, aluminum alloy primary color, white, red, beige gray; Refer to the color chart and seal the door panels with a soft connecting adhesive strip. The folding life of the soft connecting part is over one million times; The hinge load-bearing design ensures that the door curtain joint is not subjected to force, and there is no contact between the door panels, which can maintain flatness after long-term use; The door panels are sealed with EPDM cold resistant sealing strips, which can effectively isolate temperature and reduce energy loss, and have good sealing, insulation, and sound insulation properties. When the door is closed, the insulation performance should be at least K ≤ 1.7W/(㎡)? K）

　　The airtightness is 8.68m3/(m2 · h), which meets the national standard level 3; The water tightness is less than or equal to 700Pa, reaching international level 6;

　　9. Visual window: Aluminum alloy frame with double-layer polycarbonate sheet, good transparency, scratch resistance, strong weather resistance, and the same height as other door panels (220mm).

　　10. Door control system: 1. Equipped with steering protection: When the motor drive line is connected incorrectly, the controller will directly report an error and the door will stop moving; 2. The system comes with a braking function, which allows the motor to stop in position without the need for external electromagnetic brake pads, ensuring that the door stops at the limit position without any deviation; 3. Memory function after power outage. After manual operation during power outage, it can be reset directly by powering on without the need for further adjustment; 4. The motor has overload and overcurrent protection

　　11. Open control: Press the button on the control box next to the door to lift and lower the door curtain; Optional control: radar, ground magnetic ring induction, Bluetooth RF, induction, rope switch and other control methods.

AfterSalesService :

• Hard and fast rolling shutter door