Huizhou Huidong County correctly applies the extension of the service life of medical airtight doors

Description :

　　Huizhou Huidong County correctly applies the extension of the service life of medical airtight doors

　　1. The dust on the medical airtight door should be cleaned regularly to maintain the cleanliness and brightness of the medical airtight door, glass, and hardware. Because even stainless steel, once contaminated with dust and dirt, the chemicals in it will corrode the surface of the stainless steel. Over time, this will cause the steel to deteriorate and rot, affecting the operational performance of medical airtight doors.

　　2. Once the medical airtight door is contaminated with oil stains or other difficult to clean items, it can be cleaned with Jieerliang instead of strong acid or alkali solutions. This not only damages the surface smoothness of the profile, but also damages the protective film and oxide layer on the surface of the hardware, causing rusting of the hardware. Especially for some customers, when cleaning the wall, be careful not to let the doors and windows get stained.

　　3. Particles and other debris on the inside of the frame should be cleaned up in a timely manner to avoid blocking the drainage channel and causing poor drainage and water leakage. In serious cases, it can also affect the operation of the radiation protection automatic door, shorten the service life of the automatic door, and pose safety hazards.

　　4. When opening the medical airtight door, the force should be moderate, and the speed of opening and closing should be kept as uniform as possible.

　　5. When entering or exiting medical airtight doors, one should avoid impatience and recklessness, and try to avoid hard objects hitting the radiation protection automatic door or scratching the surface of the profile.

　　6. When it is found that the medical airtight door is not flexible to open or has other abnormal situations during use, the cause should be promptly investigated. If the customer cannot eliminate the fault themselves, they should contact the manufacturer or supplier of the radiation protection automatic door in a timely manner so that the fault can be eliminated in a timely manner. If the automatic door is not repaired in a timely manner, its use should be suspended to avoid accidents.

AfterSalesService :

• Medical gas-tight doors