Installation method of medical sliding door operating room sensing door foot sensing automatic door

Description :

Installation method of medical sliding door in Longmen County, Huizhou

　　1. Process flow: Mark the installation position and elevation of the medical sliding door → transport the door and window sash → erect steel doors and windows → temporarily fix with wooden wedges → recheck the installation elevation according to the horizontal line, recheck the installation position according to the center line → weld and fix → block the hole → install hardware accessories → install the door sash

　　2. Draw lines to find rules: According to the installation position, size, and elevation of the medical sliding door on the design drawings, measure the window edges on both sides based on the window centerline.

　　3. According to the requirements of the medical sliding door number on the drawing, transport the medical sliding doors to the installation site separately, and firmly cushion them to prevent collision and injury.

　　4. The medical sliding door frame is in place, and the fixed iron foot is inserted into the reserved hole to straighten and ensure accurate positioning. It is temporarily fixed with wooden wedges, and a 2cm gap is left between the window frame and the beam. The gap on both sides is uniform, the width is consistent, and the distance from the outer wall meets the design requirements.

　　5. After the medical sliding door frame is erected, the position and elevation should be checked. After meeting the requirements, the upper frame iron feet should be welded firmly to the beam iron parts. The iron feet on both sides of the window should be inserted into the reserved holes, moistened with water, and blocked tightly with 1:3 dry hard mortar. Water should be sprayed for curing.

　　6. Installation of door leaf: Check whether the width of the upper, middle, and lower parts of the door frame is consistent. After clarifying the opening direction, measure the net size of the door and window frame opening, and then determine the height and width of the leaf. Hang the fan and check if the gap meets the requirements, if the fan is flush with the frame, and if the fan can be closed properly. After passing the inspection, tighten all the screws. For the installation of double doors, attention should also be paid to the misalignment process. When viewed from the direction of opening, the right-hand door is the cover opening, and the left-hand door is the equal opening.

AfterSalesService :

• Medical sliding door