Cement plant stacking fast door asphalt mixing plant automatic rolling shutter door

Description :

　　1. Scope of application: Logistics channels, indoor partitions, and other high-efficiency functions such as insulation, dust prevention, noise reduction, odor isolation, etc.

　　2) Frame material: ordinary type: selected cold-rolled steel plate (cold-rolled steel plate treated with baking paint process). Aluminum alloy type: The column is made of aluminum alloy profile (surface treated with anti-oxidation). Stainless steel type: All main steel structures are made of stainless steel.

　　3) Curtain material: high-density industrial base fabric produced in France. Thickness: 0.8mm. The base fabric is available in various colors such as red, yellow, blue, white, gray, semi transparent, and fully transparent.

　　4) Wind resistance performance:

　　1. The door curtain is equipped with aluminum alloy wind resistant rods, and the number of wind resistant rods is selected according to the wind pressure.

　　2. The fully transparent 1.5mm thick PVC film window increases safety and management convenience.

　　3. Segmented aluminum alloy has strengthened wind resistance and also has functions such as segmented replacement and updating of curtains

　　5) Opening and closing speed: (0.6-1.5m/s), can be turned on at high frequency more than 1000 times/day

　　6) Protection device: The bottom of the fast rolling door pillar is equipped with a photoelectric device. When it touches an obstacle during the closing process, it immediately stops descending, rebounds, and rebounds. An optional airbag device can also be installed to increase the safety factor.

　　7) Sealing performance: The bottom is equipped with a weighted PVC bottom pocket, which can be tightly combined with various uneven surfaces. Both sides of the goalpost are equipped with sealing brushes, which can reduce noise and increase sealing effect.

　　8) Drive device: Sino Italian joint venture SEJ motor single-phase 220V power 0.75-1.5KW motor strong brake, worm gear reducer integrated type.

　　9) Electric control system: 1. The control box has five buttons (up, stop, down, power indicator, automatic switch) and three control up, emergency stop, and down switches on the outside of the door. The frequency converter stabilizes the voltage and controls the speed of the fast door operation, extending the service life of the motor. Hailip PLC computer programming control enables various sensors to ensure smooth and safe operation of door switches.

　　10) Opening methods: radar induction, photoelectric, manual button (basic configuration); Type, pull rope type, geomagnetic ring induction type (optional configuration).

AfterSalesService :

• Cement plant stacked rapid door