JD-1.6 Scheduling Winch Operation JD-1.6 Scheduling Winch Performance

Description :

　　Composition and working principle of JD-1.6 scheduling winch

　　The JD-1.6 scheduling winch is mainly composed of a drum and planetary gear transmission device, a brake device, an electric motor, and a base. The reduction mechanism of the winch adopts two sets of internal gear transmission pairs and one set of planetary gear system. The two sets of internal gear pairs are installed inside the drum, and the shaft end of the motor is equipped with a sleeve gear that directly extends into the drum. Rolling bearings are used at all rotating points inside the winch.

　　Technical parameters of JD-1.6 scheduling winch

　　1. Static tension of outer steel wire rope: 16kN

　　2. Roll size (diameter × width): φ 310 × 400 (mm)

　　3. Outer steel wire rope speed: 1.399 m/s

　　4. Wire rope diameter: 16mm

　　5. Rope capacity: 400m

　　6. Total reduction ratio: 32.5

　　7. Motor model: YBJ25-4 Power: 25kW Speed: 1460r/min Voltage: 380/660v

　　8. Dimensions (length x width x height): 1435 x 1217 x 1242 (mm)

　　9. Winch weight (excluding motor): 1187kg (including motor): 1370kg.

　　JD-1.6 Dispatch Winch Product Introduction

　　JD-1.6 scheduling winch is used for dispatching and grouping mining cars underground or at surface loading stations, as well as for auxiliary handling work in intermediate tunnels. This winch adopts explosion-proof electrical equipment and can be used in mines with coal dust and gas. The winch adopts a planetary gear transmission form, which has the characteristics of compact structure, small volume, and simple operation.

　　The significance of JD-1.6 scheduling winch model

　　Model: JD-1.6 Dispatch Winch;

　　J - winch type;

　　D - Dispatch winch;

　　1.6- Static tension of outer steel wire rope, 16kN.zmjt055

AfterSalesService :

• Dispatch winch