Complete models of scheduling winches, manufacturers of scheduling winches

Description :

　　JD dispatch winch is a type of winch used for dispatching vehicles, commonly used in underground mining areas, coal bunkers, loading station dispatch rooms, traction mining cars, and can also be used for other auxiliary traction operations. This winch is powered by an electric motor through a reducer system to provide torque to the drum. It uses steel wire rope to wrap around the drum and a braking device to control operation and stop, meeting the purpose of scheduling and material handling. It is sturdy, reliable, and has a low failure rate.

　　Parameters of scheduling winch

　　Model JD-1.6 (25kw) outer steel wire rope static tension KN: 16;

　　Low rope speed (inner layer) m/s: 0.733; Rope speed (outer layer) m/s: 1.399, average rope speed: 1.066;

　　Wire rope diameter mm: 16; Rope capacity m: 400;

　　Motor power KW: 25kw Motor voltage V: 380/660 or 660/1140;

　　Dimensions mm: 1435 * 1217 * 1255; Weight of winch including motor kg: 1370;

　　The meaning of model composition (taking JD-1.6 (25KW) as an example):

　　J: Winch;

　　D: Dispatch winch;

　　1: The static tension of the outer steel wire rope is 16KN, which can also be said to have a load-bearing capacity of 1.6t;

　　The power of the electric motor is 25KW. The old model of the winch is named after power, while the new model uses the load-bearing capacity. That is to say, the old model is JD25, and the current model is JD-1.6. Customers usually refer to the 25KW winch, which means the JD-1.6 winch

　　Scheduling winch working conditions

　　1. Environmental temperature -10-40 ℃

　　2. The relative humidity of the environment shall not exceed 95% (25 ℃)

　　3. The altitude is below 2000m.

　　3. The methane, coal dust, carbon dioxide, and other pollutants in the surrounding air shall not exceed the safe content specified in the Coal Mine Safety Regulations.

　　zmjt055

AfterSalesService :

• Dispatch winch