MGC3.3-9 Fixed Box type Mine Car Manufacturer Selling Fixed Box type Mine Car Features

Description :

　　Technical parameters of MGC3.3-9 fixed box type mining car

　　Model: MGC3.3-9

　　Capacity: 3.3 cubic meters

　　Nominal loading capacity: 3 tons

　　Loading capacity: 5.3 tons

　　Track gauge: 900mm

　　Dimensions: Length 3450mm, Width 1320mm, Height 1300mm

　　Wheelbase: 1100mm

　　Wheel diameter: 350mm

　　Traction height: 320mm

　　Rated traction force: 60KN zmjt055

　　MGC3.3-9 Fixed Box type Mine Car Product Introduction

　　MGC3.3-9 fixed box type mining car is a major transportation equipment for transporting coal and gangue on the ground and underground tunnels in coal mines. It is also a short distance transportation equipment for transporting materials such as sand and stones in other non-metallic ore, bridge, railway engineering, transportation and excavation projects.

　　Structural Description of MGC3.3-9 Fixed Box type Mine Car

　　The MGC3.3-9 fixed box type mining car is fixedly connected to the frame, and the mining car must be overturned and unloaded using a dump truck. Its basic components are the carriage, frame, buffer, coupler, and walking mechanism. The frame is a metal structure that can withstand traction force, braking force, collision force between mining cars, and rail impact force. Buffer devices are installed at both ends of the frame to alleviate the impact force between the two cars. Couplings are components that connect locomotives and mining cars. Commonly used ones include locking chain links and rotating chains. Large mining cars use automatic couplers that also serve as buffers. The walking mechanism consists of two wheelsets consisting of four wheels and two axles. When the total amount of mining cars and materials exceeds 20 tons, the number of wheelsets should generally be increased. For mining cars with more than two wheelsets, in order to facilitate the combination of the two wheelsets into a small car with a turntable through bends, this type of car is called a bogie.

　　Precautions for using MGC3.3-9 fixed box type mining car

　　1. During use, the load on the mining car must not exceed the specified value.

　　2. Do not operate when the connecting device malfunctions.

　　3. The chassis rigidly collides with the axle during vibration, and it is prohibited to use it when there is a malfunction between the chassis and the wheelset to avoid damaging the axle.

　　4. If severe corrosion or deformation is found on the surface of the pin or three ring chain, they should be scrapped.

　　5. Prohibit mining cars from coming into contact with each other when they first meet.

　　6. When the mining car track deforms, it should be adjusted in a timely manner, otherwise the mining wheel is vulnerable and prone to jumping during transportation.

AfterSalesService :

• solid car