BRW80 series emulsion pump station offers high-quality emulsion pump station quotations for large quantities of emulsion pump stations

Description :

　　The BRW80 series emulsion pump station consists of two emulsion pumps and one RX-640 emulsion tank. It is the hydraulic power source for the single hydraulic support of the coal mine general mining face and the hydraulic support of the economical comprehensive mining face. Due to its reasonable structure, reliable performance, and easy maintenance, it is highly welcomed by a large number of users. zmjt055

　　Main features of BRW80 series emulsion pump station

　　1. The casing is the base frame for installing the crankshaft, gearbox, gear shaft, connecting rod, slider, and pump head, and is also the main load-bearing component during movement. Therefore, it adopts a high-strength cast iron integral box structure, which has sufficient strength and rigidity.

　　2. The bearing shell is a standard steel backed high tin aluminum alloy tile. The slider seal is a standard piston ring. The connecting rod big end adopts a split structure for easy assembly and disassembly; The small head is connected by a cylindrical pin, which works reliably.

　　3. The crankshaft is made of 38CrMoALA and has undergone nitriding treatment, resulting in high hardness and good wear resistance. The plunger seal is a multi pass seal with a soft packing structure.

　　4. The pressure control device consists of an unloading valve, a pressure gauge switch, and a pressure gauge, etc. It is installed on the end face of the emulsion tank to control the pressure of the emulsion supplied to the bracket and protect the hydraulic system.

　　Technical parameters of BRW80 series emulsion pump station

　　Model: BRW80/15, BRW80/20, BRW80/31.5, BRW80/40

　　Rated flow rate (L/min): 80, 80, 80, 80

　　Rated pressure (MPa): 15, 20, 31.5, 40

　　Motor power (kw): 30, 37, 55, 75

　　Piston diameter (mm): 32, 32, 32, 32

　　Tank volume (L): 640, 640, 640, 640.

AfterSalesService :

• BRW80 series emulsion pump station