ISG Vertical Pipeline Pump Specification New ISG Vertical Pipeline Pump Production ISG Vertical Pipeline Pump

Description :

　　The ISG type vertical single-stage pipeline centrifugal pump, also known as pipeline pump, centrifugal pump, pipeline centrifugal pump, single-stage centrifugal pump, vertical pump, booster pump, hot water pump, circulating pump, etc., is ingeniously designed based on the general vertical pipeline pump. At the same time, according to different operating temperatures, media, etc., it has derived suitable hot water pipeline pumps, high-temperature corrosion-resistant chemical pipeline pumps, and pipeline oil pumps from the ISG series pipeline pumps. This series of products has the advantages of high efficiency, energy saving, low noise, and reliable performance.

　　ISG vertical pipeline centrifugal pump is used for conveying clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire protection pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water circulation pressurization and equipment matching. The operating temperature is T ＜ 80 ℃.

　　ISG Vertical Pipeline Pump Product Features

　　1. The pump is a vertical structure with the same inlet and outlet diameters and located on the same centerline. It has significant advantages such as compact and beautiful appearance, small footprint, and low construction investment.

　　2. The impeller is directly installed on the long axis of the motor, with a short axial dimension and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, ensuring smooth operation, low vibration, and low noise of the pump.

　　3. Easy installation and maintenance, no need to disassemble the pipeline system, just remove the pump coupling nut to extract all rotor components.

　　4. The series or parallel operation of pumps can be adopted according to the requirements of flow rate and head.

　　5. Vertical and horizontal installation of pumps can be adopted according to the requirements of pipeline layout.

　　Working conditions of ISG vertical pipeline pump

　　1. The suction pressure is ≤ 1.0MPa, or the working pressure of the pump system is ≤ 1.6MPa, that is, the suction inlet pressure+pump head is ≤ 1.6MPa, and the pump static pressure test pressure is ≤ 2.5MPa.

　　2. Environmental temperature<40 ℃, relative humidity<40%.

　　3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm.

　　Technical parameters of ISG vertical pipeline pump

　　Flow rate: 1.1~1500 cubic meters per hour

　　Head: 7~156 meters Power: 0.18~250KW

　　Material: Stainless steel

　　Operating temperature: ≤ 80 ℃

　　zmjt055

AfterSalesService :

• ISG vertical pipeline pump