The function of PCX fine crushing hammer crusher is fast delivery

Description :

　　The PCX series fine crushing strong hammer crusher is suitable for crushing various types of medium hard and brittle materials such as limestone, coal gangue, gypsum, shale, etc. with compressive strength below 180MPa in coarse, medium, and fine crushing operations. The motor drives the triangular belt and pulley to drive the rotor to rotate at high speed inside the crushing chamber. The material is hit and rubbed by the hammer head to meet the requirements, and is discharged through the sieve plate hole.

　　The PCX fine crushing hammer crusher can crush large ores from mines to an average particle size of 5mm in one go. It is an ideal replacement for the traditional two-stage and three-stage crushing methods, simplifying the process flow, saving infrastructure investment and production costs.

　　Working principle of PCX fine crushing hammer crusher

　　The main working component of the PCX fine crushing hammer crusher is the rotor with a hammer head The rotor consists of a main shaft, a disc, a pin shaft, a hammer handle, and a hammer head. The motor drives the rotor to rotate at high speed inside the crushing chamber The material enters the machine from the upper feeding port and is crushed by the impact, shearing, and grinding of the high-speed moving hammer head. There is a counterattack plate at the upper part of the rotor, a striking plate at the rear of the rotor, and a sieve plate at the lower part of the rotor. The particles smaller than the sieve hole size in the crushed material are discharged through the sieve plate, while the coarse particles are retained on the sieve plate and continue to be hit and ground by the hammer head before being discharged through the sieve plate.

　　PCX fine crushing hammer crusher applicable scope zmjt055

　　PCX fine crushing hammer crusher is suitable for crushing raw materials such as limestone, mudstone, sandstone, shale, gypsum, coal, etc. with compressive strength<150MPa. At the same time, the supporting equipment for stone and sand production lines, mineral processing equipment, and aerated concrete equipment, mainly fine crushing equipment, can also be called the fourth generation sand making machine.

　　The PCX fine crushing hammer crusher has a large crushing chamber and feeding port, which is suitable for the smooth entry of large ores. The rotor with special structure can strike the material along the entire width, and the crushing efficiency is higher than that of ordinary crushers. The forward discharge grate improves the passage conditions of materials. When crushing materials containing a small amount of clay, the pipe joints are not easily blocked. The overall structure of the machine is exceptionally strong, and even if iron parts accidentally enter the machine, it is not easy to damage the components. The lower part of the rotor is equipped with an iron gate, which can discharge the iron parts brought by the hammer head.

　　Characteristics of PCX fine crushing hammer crusher equipment

　　1. Allow feeding particle size to be large (400mm ≤ D ≤ 1200mm)

　　2. High crushing ratio and good product particle size

　　3. The particle size of the discharge can be adjusted according to demand within the range of 5-40mm

　　4. Simplify the process flow, occupy a small area, and save more than 40% electricity compared to conventional three-stage crushing

　　5. Fragile parts (hammer head, grate plate) have a long durability life. Simple structure, minimal maintenance required

　　A person can complete a comprehensive inspection and maintenance of the entire machine within 20 minutes with just one wrench.

　　zmjt055

AfterSalesService :

• PCX fine crushing hammer crusher