Blue Tech Filler P-AC Blue Tech Filler Pingxiang Qunxing

Description :

　　1、 Product Introduction

　　 The Chinese abbreviation for Lantec filling, Lanpak Octagonal Tower filling, is an additional layer of drip design on the basis of Ball Parker filling. Its geometric shape design significantly increases the equivalent gas/liquid contact area. Its main technical advantages are:

　　1. * * * Drop point design significantly improves the equivalent gas/liquid contact surface, * * * design increases the gas/liquid contact area, reduces the initial cost of the new tower, and reduces maintenance and shutdown costs;

　　2. Mass transfer, achieving the same efficiency with a lower packing height, and obtaining higher efficiency in a smaller tower;

　　3. Allow for higher empty tower flow rate design, with smaller equipment tower diameter and footprint;

　　4. The tower diameter is small, the defogging layer is relatively reduced, and the required equipment investment is low;

　　5. High clearance rate, reduced pressure, anti scaling, less prone to blockage, and low energy consumption of the fan;

　　6. The designed circulating water volume is low, and the energy consumption of the water pump is relatively small;

　　7. Smooth exterior structure and high porosity, with * * * anti scaling and anti blocking characteristics;

　　8. After operation, the fillers will not overlap with each other on site, which will not reduce efficiency or cause short flow;

　　9. Suitable for applications with general liquid flow rates, such as washing towers;

　　When expanding and renovating an old tower, only replacing the tower packing can increase the waste gas treatment capacity by 20-30%.

　　11. Smaller and more affordable blowers can be used.

　　2、 Product Material

　　LantecfillerThe main materials include polypropylene, polyethylene, and reinforced polypropylene PPH、 Hard polyvinyl chloride, chlorinated polyvinyl chloride, etc. The design of its appearance * * * can provide surface exhaust and washing liquid channels, promote mass transfer and mixing, distribution dispersion, and surface promotion between droplets and continuous filling media, while * * * miniaturizing sufficient flat distribution and filling depth. The product has a very high purification efficiency and has been proven to be a tower packing material for high liquid load applications. The main advantages of Lanpak packing are as follows: 1) Using a much lower height ratio of Bower ring diameter is advantageous for lower pressure drop and higher capacity, resulting in a result oriented evolution; 2) Excellent mechanical strength; 3) Randomly package in contaminated media.

　　3、 Product application

　　LantecfillerMainly used in environmental purification wastewater treatment equipment and devices such as gas stripping towers, degassing towers, * * * washing towers, biological treatment systems, etc.

　　4 Main characteristic data of the product

　　LantecfillerMain technical characteristic indicators

AfterSalesService :

• Lantec filler