Small Pipe Arrow Forming Machine Tunnel 50 Small Pipe Cone Pointing Machine Small Pipe Shrinking Machine Manufacturer

Description :

　　Small Pipe Arrow Forming Machine 50 Small Pipe Cone Point Machine Small Pipe Shrinking Point Machine Manufacturer

　　The advanced small pipe tip machine is a shrinking equipment independently developed by Yulong Engineering Machinery Equipment Co., Ltd. for the production of various pipes and steel sections. It is widely used in equipment for support, mining, construction engineering, and grouting processes. This YL50NCB small pipe tip machine combines the advantages of most similar equipment on the market, and is equipped with a motor, noise reduction equipment, various molds, and imported accessories from abroad. This small pipe tip machine can replace 5-8 workers, save enterprise costs, oxygen, and consumables.

　　The small guide tube processed by the pointed machine of the small guide tube is uniform, conforms to the technical requirements, has a short molding time, high efficiency, beautiful appearance without scratches, and is actually a high-quality product. It is a good tool for enterprise production, which can be achieved with the Yulong YL80CNC small guide tube punching machine and heating equipment, saving time and effort for the enterprise.

　　As the original manufacturer, Yulong definitely wants to benefit its customers. All products are standardized, and intermediaries add prices layer by layer, ensuring that those with lower prices than me are not as good as me, and those with higher prices are not as good as me in terms of service.

　　Advantages of Yulong Small Pipe Tip Forming Machine

　　1. The small tube taper machine completely replaces manual welding and has high quality;

　　2. The positioning device solves the problem of uneven length of the iron pipe clamping size;

　　3. The compression stroke has been improved, resulting in a production efficiency of 300 units per day;

　　4. The specialized mold has high precision and will not cause cracks in steel or iron pipes after crimping;

　　5. The small catheter tip machine mold can be customized according to your requirements to solve square tubes, rectangular tubes, and hexagonal shrink heads;

　　6. Less unit time, with a single peak shrinking time of 20-30 seconds;

　　7. The workpiece can be reduced by 100mm and customized

　　advance small duct

　　The Yulong small pipe tip machine can be used for the production of small pipes, steel pipes, and round pipes by shrinking and pointed processing. Generally, seamless steel pipes with a diameter of 38-50mm are used for production. A conical shape of about 10cm is made at the front end of the small conduit, and steel hoops with a diameter of 6-8mm are welded at the tail end. No holes shall be opened within 100cm from the rear end, and the remaining part shall be arranged with 6mm diameter overflow holes in a plum blossom shape of 20-30cm. The specific pipe diameter design drawing includes. Its main function is to provide pre support for weak and fractured zones, shallow buried sections, biased sections, sand layers, gravel sections, fault fracture zones, and other sections during the self stabilization period. As it is driven before excavation in this construction section and located in front of the construction surface, it is called an advanced small conduit.

　　The small catheter tip machine head is already a mature practice and should be supported by a self equipped rack. 2. It is easy to operate, highly energy-efficient, material efficient, efficient, and fast. Whether the switch and coil wire are connected properly, and the amount of steel bars used is increasing day by day. 2. It is easy to operate by flipping the switch back and forth a few times. 4. Processing and tool removal: Turn on the main motor button. 1. How to sell the electric small catheter tip machine? The thread surface is smooth and the connection is reliable; Check if the wire (interlock wire) on the circuit breaker is properly connected when the green button is released (normal), replace the relevant spare parts, check if there is any leakage when the circuit catches fire, and develop the mechanical connection of steel bars quickly. The rolling head small conduit pointed machine is small in size, light in weight, low in power consumption, and energy-saving. When tested at -40oC low temperature, the mechanical joint is easy to operate and the additional cost of the joint is low. The wrench is strictly prohibited from being used when the setting position is zero. If the green wire 5 and blue wire 11 on the inspector are not blocked, check if there is any blockage in the manufacturer's hole of the small conduit pointed machine. The tensile strength of the Grade I joint is not less than the actual connected steel bar. Tensile strength or 1.1 The tensile strength value of the reinforcing steel is multiplied, and the main reinforcement ends of the cage are not on the same section. The characteristics of the steel bar stripping rib rolling straight thread connection technology are: the water tank should be cleaned within 15 days under normal use~Small pipe arrow forming machine 50 Small pipe cone machine Small pipe taper machine Manufacturer

　　Related articles: Arrow forming machine for small pipes, grouting machine for small pipes, shrinking machine for seamless steel pipe forming machine, discounted price

AfterSalesService :

• Small catheter tip machine