Electric handling tool vehicle for petroleum machinery workshop KPC steel bar transportation track electric flat car

Description :

　　Working Principle:

　　The KPC side sliding contact line electric flat car is powered by AC 380V sliding contact line, which is then supplied to the electric control system. The electric control system controls the motor to work, and then drives the flat car to move forward, backward and other work instructions.

　　The power supply method for the KPC side sliding contact line electric flat car is to set up a trench on the side of the track, install a safety sliding contact line in the trench, and lay a single-sided hinged cover plate on the trench. When the electric flat car is in operation, the cover plate is lifted by installing a flipping device in the trench. There is a cable connected to the safety sliding contact wire collector in the flipping device, and the electric flat car is automatically placed back on the ground through the rear cover plate.

　　The KPC side sliding contact line electric flat car is a sliding contact line powered electric flat car, with 380V power supplied to the metallurgical special motor on the flat car. The motor drives the flat car to run smoothly through a reducer.

　　Product advantages:

　　The working time of the KPC series climbing car is not limited, and it operates on an assembly line. It can be frequently started and stopped, and can also be equipped with a frequency converter infinite speed control device.

　　The maintenance cost of KPC flatbed is low in the later stage, with a one-time investment in the early stage.

　　The KPC side sliding contact line electric flat car does not have high requirements for track laying.

　　The KPC side sliding contact line electric flat car is not limited by operating time and distance. This series of electric flatcars is powered by a safe sliding contact line, with no working time limit, and can carry any tonnage. It is suitable for transporting high-temperature and harsh environments such as iron ladles and steel castings, as well as frequent starting and stopping work environments.

　　The installation of the sliding contact line on the KPC series track flat car requires the opening of grooves, so it is not suitable for outdoor, water accumulation, and situations with a large number of vehicles traveling back and forth. There is no limit to working hours and it can be used for high-frequency assembly line operations.

　　Specific purpose:

　　General: When transporting long steel plates, the specific handling work of electric flat cars is to use one or two flat cars to share the lifting of long steel plates. During this period, the two flat cars should be synchronized to smoothly transport the steel plates to their destination.

　　Universal: The electric flatbed runs on a circular track. When it reaches the starting position and lifts the workpiece onto the flatbed, the flatbed starts to run along the circular track until the workpiece is unloaded at the end position, and then proceeds to the next cycle of work;

　　General purpose: When transporting lathes, the main use of electric flatcars is to transport heavy materials such as large lathes. The general transportation route is a straight line, but in special cases, flatcars need to achieve functions such as lifting and translation.

　　General purpose: When transporting aluminum bars, the main use of electric flatcars is to rely on overhead cranes (also known as overhead cranes) to transport moving objects in most factory workshops. Within the operating range of the crane, there are fewer moving objects to be transported at once, and cross workshop transportation is even more troublesome. Therefore, many companies have added cross workshop transportation equipment in their factory workshops to greatly improve work efficiency.

AfterSalesService :

• Electric handling tool vehicle