Supply low-priced LDE-400 electromagnetic flowmeter

Description :

　　Supply low-priced LDE-400 electromagnetic flowmeter

　　The measurement accuracy of this product is not affected by the type of measured medium and its physical parameters such as temperature, viscosity, density, pressure, etc. Different combinations of PTFE or rubber lining materials and electrode materials such as Hc, Hb, 316L, Ti can adapt to the needs of different media.

　　1、 Product features:

　　1. Suitable for volumetric flow measurement of conductive fluids with conductivity greater than 5 ц s/cm.

　　2. There are no active or obstructed components inside the measuring tube, and the pressure loss is small.

　　3. Lining and electrodes made of different materials have good anti-corrosion performance.

　　4. Not affected by medium, density, viscosity, temperature, pressure, and conductivity.

　　5. Low frequency rectangular wave excitation, less susceptible to interference, stable and reliable.

　　6. The converter has low energy consumption, simple and convenient installation, and users do not need to debug.

　　Supply low-priced LDE-400 electromagnetic flowmeter

　　2、 Technical parameters:

　　Accuracy level: ± 0.5%, ± 1%

　　Lining materials: polyurethane, chloroprene rubber, polytetrafluoroethylene, etc

　　Electrode materials: stainless steel, Hastelloy, titanium, platinum iridium alloy, etc

　　Connection methods: flange clamping, flange connection, etc

　　Medium temperature: 0 ℃~70 ℃, 0 ℃~130 ℃ (0 ℃~180 ℃)

　　Nominal pressure: 1.0Mpa~32 Mpa

　　Protection level: IP65, IP68

　　Explosion proof mark: ExibBT4

　　Working voltage: 220VAC, 24VDC

　　Supply low-priced LDE-400 electromagnetic flowmeter

　　3、 Installation:

　　In order to ensure the stable and reliable operation of the flowmeter, the following requirements should be noted when selecting the installation location:

　　1. Try to avoid ferromagnetic objects and equipment with strong electromagnetic fields (such as large motors, transformers, etc.) to prevent the magnetic field from affecting the working magnetic field and flow signal of the sensor.

　　2. It should be installed in a dry and ventilated place as much as possible, avoiding direct sunlight and rain. The ambient temperature should be between -20 and+60 ℃, and the relative humidity should be less than 85%.

　　3. There should be ample space around the flowmeter for easy installation and maintenance

AfterSalesService :

• LDE electromagnetic flowmeter