LC-80 cast steel elliptical gear flowmeter

Description :

　　LC-80 cast steel elliptical gear flowmeter

　　This product is a precision instrument used to measure liquid flow rate. It is a direct reading cumulative instrument that measures the total flow rate of liquid flowing through the pipeline. The elliptical gear flowmeter can use two counting mechanisms: mechanical display head and electronic display head. The display head has the functions of displaying cumulative flow rate, instantaneous flow rate, and zero return, and can achieve on-site display and remote control.

　　1、 Installation:

　　1. A filter should be installed in front of the elliptical gear flowmeter, and the arrows on both casings should point in the same direction as the flow.

　　When the measured liquid contains gas, a gas separator should be installed in front of the elliptical gear flowmeter.

　　3. Regardless of whether the pipeline is installed vertically or horizontally, the elliptical gear shaft in the elliptical gear flowmeter is installed in a horizontal position. (The dial should be perpendicular to the ground)

　　4. When the elliptical gear flowmeter is installed correctly, if it is difficult to see the reading clearly, the counter can be turned 180 ° or 90 °.

　　Before installing the elliptical gear flowmeter, use a bamboo stick to push the gear several times from the outlet. If it doesn't move, soak it in gasoline (to avoid sediment accumulation after factory calibration)

　　6. The throttle valve should be installed at the inlet of the elliptical gear flowmeter, and the switch valve should be installed at the outlet. When opening and closing each valve, it should be started slowly and not quickly opened or closed.

　　LC-80 cast steel elliptical gear flowmeter

　　2、 Usage conditions:

　　1. After unpacking, check whether the items inside the box are complete according to the packing list. Before use, carefully read the instruction manual, otherwise the flowmeter cannot be used correctly, which may cause damage to the flowmeter. The instruction manual should be properly stored.

　　2. Before use, check if the flowmeter has been damaged during transportation. Check the nameplate, which indicates important data for the flow meter parameters.

　　3. In order to use the flowmeter correctly, the application must comply with the specified conditions, which can be found on the nameplate and technical specifications.

　　3、 Characteristics:

　　1. Simple structure, easy installation and maintenance, long service life;

　　2. High measurement accuracy and wide range of measurement;

　　3. The changes in density and viscosity of the measured fluid have a relatively small impact on the instrument's indication and accuracy;

　　4. The installation is relatively convenient, and the requirements for the straight pipe sections before and after the instrument are not high.

　　4、 Product Usage:

　　LC-A type cast iron elliptical gear flowmeter is widely used for measuring various oil products and non corrosive liquid media of cast iron materials.

　　LC-E type cast steel elliptical gear flowmeter, used for measuring high-pressure and low corrosive media.

　　LC-Q type cast iron elliptical gear flowmeter, with an aluminum alloy rotor, is suitable for measuring low viscosity, low corrosion (such as gasoline, etc.) liquid media.

　　LC-B and C-type stainless steel elliptical gear flow meters are widely used for measuring highly corrosive liquid media such as acids, alkalis, salts, and organic compounds.

　　LC-L aluminum alloy elliptical gear flowmeter is a lightweight elliptical gear flowmeter widely used for measuring low corrosive liquid media, such as water and other liquid media.

AfterSalesService :

• LC elliptical gear flowmeter