Huai'an LZ-100 metal tube float flowmeter

Description :

　　Huai'an LZ-100 metal tube float flowmeter

　　The measuring tube of this product is generally made of stainless steel 304, 316L, and lined with polytetrafluoroethylene and other materials. Other special materials can also be used according to user requirements to adapt to flow measurement of highly corrosive fluids such as saltwater, hydrochloric acid, sulfuric acid, etc.

　　This product complies with industry standard JB/T 6844-93, flange standard HG20594-97, and sanitary card chuck standard ISO2852-93.

　　1、 Product features:

　　Suitable for flow measurement of small caliber and low velocity media.

　　Modular combination design, easy maintenance, and maintenance free normal use.

　　Single axis sensitive indication, non-contact new magnetic coupling structure, more stable signal transmission.

　　Dual row, large screen LCD display for instantaneous and cumulative traffic, with backlight capability.

　　The intelligent model has power failure protection, data backup and recovery functions.

　　All metal structure, earthquake resistant, pressure resistant, temperature resistant, anti-corrosion, long service life.

　　The requirements for straight pipe sections are relatively low.

　　Can be used in flammable and explosive hazardous environments.

　　Three power supply modes are available: DC24V, AC220V, and battery power supply.

　　Huai'an LZ-100 metal tube float flowmeter

　　2、 Installation:

　　1. The metal tube float flowmeter must be installed on a vibration free pipeline. The fluid flows through the flowmeter from bottom to top, and the verticality is better than 2 °. When installed horizontally, the horizontal angle is better than 2 °;

　　2. For the convenience of maintenance, replacement of flow meters, and cleaning of measuring pipelines, metal tube float flow meters installed on process pipelines should be equipped with bypass pipelines and bypass valves;

　　3. The inlet of LZ metal tube rotor flowmeter should have a straight pipe section with a length of more than 5 times the pipe diameter, and the outlet should have a straight pipe section of 250mm;

　　4. If the medium contains ferromagnetic substances, a magnetic filter should be installed; If the medium contains solid impurities, it should be considered to install a filter between the valve and the straight pipe section;

　　5. When used for gas measurement, it should be ensured that the pipeline pressure is not less than 5 times the pressure loss of the flowmeter to ensure stable operation of the float;

　　6. In order to avoid deformation of the flow meter caused by the pipeline, the flange of the process pipeline must be coaxial and parallel to the flange of the flow meter. The pipeline support should be used to avoid pipeline vibration and reduce the axial load of the flow meter. The control valve in the measurement system should be installed downstream of the flow meter:

　　7. When measuring gas, if the gas is directly discharged into the atmosphere at the outlet of the flowmeter, a valve should be installed at the outlet of the instrument, otherwise a pressure drop will occur at the float, causing data distortion.

AfterSalesService :

• LZ metal tube float flowmeter