High quality industrial wastewater flow meter

Description :

　　High quality industrial wastewater flow meter

　　Our company's products are divided into intelligent electromagnetic flow meters, sanitary electromagnetic flow meters, submersible electromagnetic flow meters, plug-in electromagnetic flow meters, split type electromagnetic flow meters, and other products.

　　1、 Performance characteristics:

　　1. Extremely strong corrosion resistance, capable of testing almost any conductive liquid

　　2. Measurement is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity

　　3. Strong anti-interference ability, almost unaffected by external interference

　　4. There are no flow blocking components inside the instrument, and there is no pressure loss, making it an energy-saving instrument

　　5. The straight pipe section has low requirements and can be calibrated online

　　6. Equipped with self checking and self diagnostic functions, convenient for maintenance

　　7. On site, the range can be modified online according to the actual needs of the user

　　High quality industrial wastewater flow meter

　　2、 Product Category:

　　1. Measurement media: conductive media such as sewage, clean water, pulp, etc

　　2. Caliber: DN10~DN1200mm

　　3. Accuracy: Level 0.5

　　4. Temperature: -20 ℃~80 ℃

　　5. Pressure: ≤ 1.6MPa

　　6. Connection method: flange

　　7. Power supply: 220VAC

　　8. Electrode material: Molybdenum containing stainless steel

　　9. Inner lining: chloroprene rubber

　　10. Protection level: Submersible type: IP68, others: IP65

　　11. Length of straight pipe section: upstream ≥ 5DN, downstream ≥ 2DN

　　12. Total power consumption: ≤ 25W

　　3、 Installation:

　　1. When measuring mixed phase fluids, choose a location that will not cause phase separation; When measuring two-component liquids, avoid placing them downstream before mixing evenly. When measuring chemical reaction pipelines, they should be placed downstream of the fully reacted section;

　　2. Try to avoid negative pressure inside the measuring tube as much as possible;

　　3. Avoid attachments such as large motors and transformers to prevent electromagnetic interference;

　　4. Choose a location with low vibration, especially for integrated instruments;

　　5. Try to avoid high concentrations of corrosive gases in the surrounding environment as much as possible;

　　6. Places that are easy to implement separate grounding for sensors;

　　7. The ambient temperature is within the range of -25/-10 to 50/600 ° C, and the temperature of the integrated structure is also limited by electronic components, with a narrower range;

　　8. Try to avoid direct sunlight as much as possible

　　9. The relative humidity of the environment should be within the range of 10% to 90%, and rainwater immersion should also be avoided.

AfterSalesService :

• Industrial wastewater flowmeter