LUGB-50 Intelligent Vortex Flow Meter

Description :

　　LUGB-50 Intelligent Vortex Flow Meter

　　This product is widely used for measuring fluids in industries such as petroleum, chemical, metallurgical, papermaking, power generation, and water conservancy. The flowmeter has no movable parts, strong reliability, high accuracy, and long service life. It can accurately measure the instantaneous flow rate and cumulative flow rate of fluids over a wide flow range.

　　1、 Main features of the product:

　　Complete variety, wide measurement range, high accuracy

　　The detection sensor is not in contact with the medium and has high reliability

　　Gas liquid universal, with a wide range of applications

　　No movable parts, sturdy and simple structure, long service life

　　Low pressure loss and affordable measurement cost

　　The detection sensors are interchangeable and do not require calibration after replacement, making maintenance easier

　　Plug in flow meter can be disassembled for continuous flow

　　Corrosion resistant, safe, and explosion-proof

　　LUGB-50 Intelligent Vortex Flow Meter

　　2、 Technical parameters:

　　1. Nominal diameter (mm): 15, 25, 40, 50, 65, 80, 100, 125, 150, 200, 250, 200, 300 (200-2000 plug-in type) Non standard products can be customized according to user requirements

　　2. Nominal pressure (MPa): DN15-DN200 4.0 (>4.0 protocol supply), DN250-DN300 1.6 (>1.6 protocol supply)

　　3. Medium temperature (℃): Piezoelectric type: -40~260, -40~320; Capacitive: -40~300, -40~400, -40~450 (protocol ordering)

　　4. Body material: The instrument housing is made of aluminum alloy, 1Cr18Ni9Ti (other materials are supplied according to the agreement)

　　5. Vibration acceleration: piezoelectric type: 0.2g, capacitive type: 1.0-2.0g

　　6. Accuracy: ± 1% R, ± 1.5% R, ± 1FS; Insertion: ± 2.5% R, ± 2.5% FS

　　7. Range: 1:6-1:30

　　8. Power supply voltage: Sensor:+12V DC,+24V DC; Transmitter:+12V DC,+24V DC; Battery powered type: 3.6V battery

　　9. Output signal: Square wave pulse (excluding battery powered type): High level ≥ 5V, low level ≤ 1V; Current: 4-20mA

　　10. Pressure loss coefficient: in accordance with JB/T9249 standard Cd ≤ 2.4

　　11. Explosion proof mark: Intrinsic safety type: Exd Ⅱ ia CT2-T5 Explosion proof type: Exd Ⅱ CT2-T5

　　3、 Installation:

　　① The direction of the flow arrow on the vortex flowmeter is consistent with the flow direction of the fluid, and its installation angle is not limited.

　　② The length of the upstream straight pipe section is 15-40DN, and the length of the downstream straight pipe section is 5DN

　　③ When pressure and temperature compensation is required, pressure and temperature transmitters should be equipped. The pressure relief hole should be located 3-5 DN downstream of the sensor, and the diameter of the pressure hole should be 6-12mm. The temperature measurement point should be set 6-8 DN downstream.

AfterSalesService :

• LUGB Vortex Flow Meter