Stainless steel LUGB-65 vortex flowmeter

Description :

　　Stainless steel LUGB-65 vortex flowmeter

　　This product is widely used in the measurement of fluids in industries such as petroleum, chemical, metallurgy, papermaking, power generation, and water conservancy.

　　1、 Select installation location:

　　1. The installation position should be selected as much as possible in a location without pipeline vibration or with low vibration, and the vibration acceleration should not exceed 2g. If the vibration is large, vibration reduction measures need to be taken;

　　2. There must be sufficient straight pipe sections upstream and downstream of the flowmeter;

　　3. The maintenance valve is installed upstream of the sensor, and the flow control valve is installed downstream of the sensor;

　　4. Try to choose a location that is easy to install and maintain;

　　5. Choose a location with a dry environment;

　　6. Sensors can be installed on horizontal or vertical pipelines. But when installed on a vertical pipeline, the medium must flow from bottom to top.

　　Stainless steel LUGB-65 vortex flowmeter

　　2、 Technical parameters:

　　Measurement medium: gas, liquid, vapor

　　Connection methods: flange card type, flange type, plug-in type

　　Measurement accuracy: Level 1.0, Level 1.5

　　Measurement temperature: normal temperature -25 ℃~100 ℃, high temperature -25 ℃~150 ℃ -25 ℃~250 ℃

　　Output signal: Pulse voltage output signal, high level 8-10V, low level 0.7-1.3V, pulse duty cycle of about 50%, transmission distance of 100m, pulse current remote transmission signal 4-20mA, transmission distance of 1000m

　　Environmental temperature: -25 ℃~+55 ℃ Humidity: 5-90% RH50 ℃

　　Shell material: stainless steel, aluminum alloy

　　Power supply: DC24V or lithium battery 3.6V

　　Explosion proof grade: intrinsic safety type iaIIbT3-T6

　　Protection level: IP65

　　3、 Characteristics:

　　1. It can accurately measure the flow rates of gases, liquids, and vapors over a wide range of flow rates without being affected by fluid physical properties;

　　2. Not affected by temperature and pressure, and not easily blocked, stuck, or scaled, resistant to high temperatures and pressures;

　　3. Safe and explosion-proof, suitable for harsh environments;

　　4. Designed with no movable parts, no holes or gaps, the product is wear-resistant, dirt resistant, does not require mechanical maintenance, and has a long service life;

　　5. Adopting low-power high-tech and battery powered on-site display flowmeter, it can operate continuously for more than two years without electricity;

　　6. Integrated design of temperature and pressure compensation;

　　7. The current output is all electrically isolated, with good common mode interference suppression capability;

　　8. Simultaneously display traffic values and cumulative traffic values, without the need to switch between them;

　　9. Adopting anti vibration probes to effectively eliminate the influence of external vibrations;

　　10. The circuit adopts surface mount technology, with a compact structure and high reliability.

AfterSalesService :

• LUGB Vortex Flow Meter