Intelligent LDG-300 electromagnetic flowmeter
Category:
Instrumentation/Flow meter/electromagnetic flowmeter
Model:
LDG-300
Brand:
Jiangsu Fenghui Instrument Co., Ltd
Retail Price
2,700.00USD
重量
kg
- Product Description
-
Description :
Intelligent LDG-300 electromagnetic flowmeter
The installation methods of this product are divided into two types: pipeline type and plug-in type. Both types consist of sensors and intelligent signal converters, which can be divided into two structures based on the assembly form of the converter and sensor: integrated and separated; One salary type: The converter and sensor are directly assembled as a whole and cannot be separated - commonly used in sites with good environmental conditions. Split type: The converter is composed of a dedicated cable and a sensor to form a product, with the sensor installed on site and the converter installed in a well conditioned field. Commonly used in sites with poor environmental conditions, such as underground wells, high-temperature areas, and places where personnel cannot reach. Pipeline type is generally suitable for measuring the flow rate of larger diameter pipelines.
1、 Performance characteristics:
The instrument structure is simple, reliable, without moving parts, and has a long working life.
No flow blocking components, no pressure loss or fluid blockage.
No mechanical inertia, fast response, good stability, can be applied to automatic detection, adjustment, and program control systems.
The measurement accuracy is not affected by the type of measured medium and its physical parameters such as temperature, viscosity, density, pressure, etc.
Different combinations of PTFE or rubber lining materials and electrode materials such as Hc, Hb, 316L, Ti can adapt to the needs of different media.
There are various flow meter models available, including pipeline type and plug-in type.
Using EEPROM memory, the storage of measurement and operation data ensures safety and reliability.
It has two types: integrated and separated.
High definition LCD backlit display.
Intelligent LDG-300 electromagnetic flowmeter
2、 Category:
The FH-1000 series electromagnetic flowmeter consists of a sensor and an intelligent signal converter. According to the assembly form of the converter and sensor, it can be divided into two structures: integrated and split.
Integrated: The converter and sensor are directly assembled as a whole and cannot be separated. Commonly used in sites with good environmental conditions.
Split type: The converter is composed of a dedicated cable and a sensor to form a product, with the sensor installed on site and the converter installed in a location with better conditions. Commonly used in sites with poor environmental conditions, such as underground wells, high temperatures, and places that are difficult for personnel to reach.
3、 Installation:
⑴ Try to avoid ferromagnetic objects, high radio frequency, strong vibration interference sources, and equipment with strong electromagnetic fields (such as high-power motors, large transformers, etc.) to avoid magnetic fields affecting the working magnetic field and flow signal of the sensor.
⑵ It should be installed in a dry and ventilated place as much as possible, and should not be installed in damp or water prone areas.
⑶ Avoid direct sunlight and rain as much as possible, and the ambient temperature should be between -20 and 60 ℃ with a relative humidity of less than 95%.
⑷ Choose a place that is easy to maintain and move around.
⑸ The flowmeter should be installed at the rear end of the water pump and must not be installed on the suction side; The valve should be installed on the downstream side of the flow.
AfterSalesService :
Key words:- LDG electromagnetic flowmeter
