DN600 sewage electromagnetic flowmeter

Description :

　　DN600 sewage electromagnetic flowmeter

　　The main structure of this product consists of a magnetic circuit system, measuring conduit, electrode, housing, lining, and converter. Advantages include: the measurement is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity.

　　1、 Product features:

　　High definition backlit LCD display, fully Chinese menu operation, easy to use, simple to operate, easy to learn and understand.

　　It has the function of measuring positive/negative bidirectional flow.

　　Stable performance, good repeatability, and high accuracy.

　　It has self checking and self judging functions.

　　No blocking components, no pressure loss, and not easily clogged.

　　There are few constraints on on-site installation, and besides being favored in traditional industries, it has continuously replaced other flow meters in many fields.

　　DN600 sewage electromagnetic flowmeter

　　2、 Technical parameters:

　　Caliber: DN10-DN2000 (mm) Special customizable

　　Nominal pressure: 0.6-4.0MPa (differentiated by caliber, special high pressure can be customized)

　　Electrode materials: 316L stainless steel, Hastelloy C, Hastelloy B, titanium, tantalum, platinum iridium electrode

　　Lining materials: polytetrafluoroethylene (PTFE), perfluoroethylene propylene (FEP), chloroprene rubber (Ne), polyurethane rubber (PU)

　　Medium temperature: -40~180 ℃ (limited by the temperature resistance characteristics of the lining material, as follows:

　　Neoprene rubber lining: -40~+80 ℃ Polyurethane rubber lining: -10~+60 ℃

　　PTFE lining: -30~+120 ℃, PTFE lining: -30~+180 ℃

　　Shell material carbon steel (customizable stainless steel shell)

　　Protection levels IP65, IP67, IP68

　　Working power supply 220VAC, 24VDC

　　Current output 4~20mA

　　3、 Installation:

　　1. Requirements for the external environment

　　a、 Flow meters should be avoided from being installed in places with large temperature changes or high temperature radiation from equipment. If installation is necessary, insulation and ventilation measures must be taken.

　　b、 The flowmeter should be installed indoors. If it must be installed outdoors, it should be protected from rainwater, waterlogging, and direct sunlight. Moisture and sun protection measures should be taken.

　　c、 Flow meters should be avoided from being installed in environments containing corrosive gases, and ventilation measures must be taken when installation is necessary.

　　d、 For installation, maintenance, upkeep, and convenience, there needs to be ample installation space around the flowmeter.

　　e、 The installation site of the flowmeter should avoid strong magnetic fields and vibration sources. If the pipeline vibration is large, there should be fixed pipe supports on both sides of the flowmeter.

　　2. In order to improve the effects of vortex and flow field distortion on the straight pipe section, there are certain requirements for the length of the straight pipe section before and after the installation of the flowmeter, otherwise it will affect the measurement accuracy (rectifiers can also be installed, and installation near the regulating valve and half open valve should be avoided as much as possible).

AfterSalesService :

• DN600 electromagnetic flowmeter