Supply LDG-40 electromagnetic flowmeter

Description :

　　Supply LDG-40 electromagnetic flowmeter

　　Electromagnetic flow meters are widely used in industries such as petroleum, chemical, metallurgical, thermal, textile, and papermaking for the flow of general conductive liquids (tap water, sewage, saltwater, etc.), as well as for measuring the flow of liquid-solid two-phase flow, high viscosity liquid flow, and corrosive liquids such as salts, strong acids, and strong alkalis.

　　1、 Technical parameters:

　　Accuracy level: ± 0.5%, ± 1%

　　Lining materials: polyurethane, chloroprene rubber, polytetrafluoroethylene, etc

　　Electrode materials: stainless steel, Hastelloy, titanium, platinum iridium alloy, etc

　　Connection methods: flange clamping, flange connection, etc

　　Medium temperature: 0 ℃~70 ℃, 0 ℃~130 ℃ (0 ℃~180 ℃)

　　Nominal pressure: 1.0Mpa~32 Mpa

　　Protection level: IP65, IP68

　　Explosion proof mark: ExdiiBT4

　　Working voltage: 220VAC, 24VDC

　　Supply LDG-40 electromagnetic flowmeter

　　2、 Functional features:

　　1. Adopting programmable low-frequency rectangular excitation waves with good stability;

　　2. Adopting a 16 bit embedded microprocessor, it has fast computing speed and high accuracy;

　　3. Adopting full digital processing, it has strong anti-interference ability, stable performance, and a measurement range of up to 150:1

　　4. Adopting high-definition LCD backlight LCD display;

　　5. It has bidirectional flow measurement and bidirectional total accumulation functions, and bidirectional output functions for current and frequency;

　　6. Optional M-bus and HART protocols;

　　7. Equipped with self checking and self diagnostic functions;

　　3、 Installation:

　　1. Try to avoid ferromagnetic objects and equipment with strong electromagnetic fields (such as large motors, transformers, etc.) to prevent the magnetic field from affecting the working magnetic field and flow signal of the sensor.

　　2. It should be installed in a dry and ventilated place as much as possible, and should not be installed in damp or water prone areas.

　　3. Avoid direct sunlight and rain as much as possible, and avoid environments with temperatures above 60 ℃ and relative humidity above 95%.

　　4. Choose a place that is easy to maintain and has convenient activities.

AfterSalesService :

• LDG electromagnetic flowmeter