Split LDE electromagnetic flowmeter LDE-200 sewage electromagnetic flowmeter
Category:
Instrumentation/Flow meter/electromagnetic flowmeter
Model:
LDE-200
Brand:
Fenghui Instrument
Retail Price
2,150.00USD
重量
kg
- Product Description
-
Description :
This product can not only meet on-site display requirements, but also output 4-20mA current signals for recording, adjustment, and control. It has been widely used in industrial technology and management departments such as chemical, environmental protection, metallurgy, medicine, papermaking, and water supply and drainage.
1、 Performance characteristics:
The instrument structure is simple, reliable, without moving parts, and has a long working life.
No flow blocking components, no pressure loss or fluid blockage.
No mechanical inertia, fast response, good stability, can be applied to automatic detection, adjustment, and program control systems.
The measurement accuracy is not affected by the type of measured medium and its physical parameters such as temperature, viscosity, density, pressure, etc.
Different combinations of PTFE or rubber lining materials and electrode materials such as Hc, Hb, 316L, Ti can adapt to the needs of different media.
There are various flow meter models available, including pipeline type and plug-in type.
Using EEPROM memory, the storage of measurement and operation data ensures safety and reliability.
It has two types: integrated and separated.
High definition LCD backlit display.
2、 Performance indicators:
Flow velocity measurement range: (0.05-10) m/s
Power consumption:<15VA
Protection level: IP68
Connection method: flange connection
Electrode materials: molybdenum containing stainless steel OCr18Ni12Mo2Ti, Hastelloy B, Hastelloy C, titanium Ti, tantalum, etc
Measuring pipeline diameter: DN (32-6000) mm
Instrument accuracy: Level 1.0
Work pressure: ≤ 1.6MPa
Medium temperature: 0-80 ℃
3、 Attention:
The selection of instruments is a very important task in instrument applications. Relevant data shows that 2/3 of instrument failures in practical applications are caused by incorrect selection or installation of instruments. Please pay special attention.
Collect data:
1. The composition of the fluid being tested;
2. Flow rate, minimum flow rate;
3. Work pressure;
4. Temperature, temperature.
AfterSalesService :
Key words:- Split LDE electromagnetic flowmeter
