Intelligent LUX Spiral Vortex Flow Meter LUX-20 Aluminum Alloy Spiral Vortex Flow Meter

Description :

　　When this product is used to measure gases, the volumetric flow rate under working conditions is estimated based on the pipeline gas volume and the possible temperature and pressure range of the medium, and the flowmeter specification is selected correctly; If both calibers can cover the flow range, it is recommended to choose a smaller specification of flowmeter within the allowable pressure range.

　　1、 Product features:

　　No mechanical movable parts, not easily corroded, stable and reliable, long service life, long-term operation without special maintenance;

　　Using 16 bit computer chips, high integration, small size, good performance, and strong overall functionality; The intelligent flowmeter integrates a flow probe, microprocessor, pressure, and temperature sensors, and adopts a built-in combination to make the structure more compact. It can directly measure the flow rate, pressure, and temperature of the fluid, and automatically track compensation and compression factor correction in real time;

　　Adopting a Chinese character dot matrix display screen with multiple digits, the reading is intuitive and convenient. It can directly display the volume flow rate under working conditions, the volume flow rate under standard conditions, the total amount, as well as parameters such as medium pressure and temperature;

　　The flowmeter head can rotate 360 degrees, making installation and use simple and convenient.

　　2、 Technical performance:

　　execution standard

　　The flowmeter shall comply with JJG 198-94 "Verification Regulations for Velocity Flowmeters".

　　Natural cyclone inlet vortex flowmeter flange connection type

　　Environmental conditions for use

　　Environmental temperature: -30 ℃~55 ℃

　　Relative humidity: 5% to 95%

　　Atmospheric pressure: 86KPa~106KPa

　　working conditions

　　Medium temperature range: -20 ℃ to 70 ℃

　　Nominal pressure: 1.6, 2.5, 4.0, 6.3 MPa

　　3、 Precautions for use:

　　On site installation and maintenance must comply with the warning message "Do not open the lid when there is explosive gas", and turn off the external power before opening the lid.

　　2. The selection should be within the specified flow range to prevent overspeed operation, in order to achieve ideal accuracy and ensure normal service life.

　　To prevent damage to pipelines and instruments caused by instantaneous airflow impact, the front valve should be slowly opened before the flowmeter is put into operation, and then the rear valve should be slowly opened. After running the small flowmeter for 1-2 minutes and the instrument is running normally, the rear valve should be fully opened. When closing the valve, it should be slowly closed first and then the valve should not be suddenly closed.

　　4. It is not allowed to open the back cover or change the internal parameters of the flowmeter at will during operation, otherwise it will affect the normal operation of the flowmeter.

　　5. Do not loosen the fixed part of the flowmeter at will.

AfterSalesService :

• Intelligent LUX Spiral Vortex Flow Meter