Sell DN150 electromagnetic flowmeter DN150 electromagnetic flowmeter direct sales

Description :

　　This product is an induction instrument for measuring the volumetric flow rate of conductive media. While performing on-site monitoring and display, it can output standard current signals for recording, adjusting, and controlling, achieving automatic detection control and long-distance signal transmission.

　　1、 Technical parameters

　　Caliber: DN10-DN2000 (mm) Special customizable

　　Nominal pressure: 0.6-4.0MPa (differentiated by caliber, special high pressure can be customized)

　　Electrode materials: 316L stainless steel, Hastelloy C, Hastelloy B, titanium, tantalum, platinum iridium electrode

　　Lining materials: polytetrafluoroethylene (PTFE), perfluoroethylene propylene (FEP), chloroprene rubber (Ne), polyurethane rubber (PU)

　　Medium temperature: -40~180 ℃ (limited by the temperature resistance characteristics of the lining material, as follows:

　　Neoprene rubber lining: -40~+80 ℃ Polyurethane rubber lining: -10~+60 ℃

　　PTFE lining: -30~+120 ℃, PTFE lining: -30~+180 ℃

　　Shell material carbon steel (customizable stainless steel shell)

　　Protection levels IP65, IP67, IP68

　　Working power supply 220VAC, 24VDC

　　Current output 4~20mA

　　2、 Product Features

　　High definition backlit LCD display, fully Chinese menu operation, easy to use, simple to operate, easy to learn and understand.

　　It has the function of measuring positive/negative bidirectional flow.

　　Stable performance, good repeatability, and high accuracy.

　　It has self checking and self judging functions.

　　No blocking components, no pressure loss, and not easily clogged.

　　There are few constraints on on-site installation, and besides being favored in traditional industries, it has continuously replaced other flow meters in many fields.

　　3. Installation

　　1. Try to avoid ferromagnetic objects and equipment with strong electromagnetic fields (such as large motors, transformers, etc.) to prevent the magnetic field from affecting the working magnetic field and flow signal of the sensor.

　　2. It should be installed in a dry and ventilated place as much as possible, and should not be installed in damp or water prone areas.

　　3. Avoid direct sunlight and rain as much as possible, and avoid environments with temperatures above 60 ℃ and relative humidity above 95%.

　　4. Choose a place that is easy to maintain and has convenient activities.

　　5. The flowmeter should be installed at the rear end of the water pump and must not be installed on the suction side.

AfterSalesService :

• DN150 electromagnetic flowmeter