LUX-200 Spiral Vortex Flow Meter

Description :

　　This product can automatically compensate for temperature, pressure, and compression factor, making it an ideal instrument for gas measurement in industries such as petroleum, chemical, power, and metallurgy.

　　1、 Product features:

　　No mechanical movable parts, not easily corroded, stable and reliable, long service life, long-term operation without special maintenance.

　　The shell is available in stainless steel and aluminum alloy options.

　　Built in pressure, temperature, and flow sensors, high safety performance, compact structure, and beautiful appearance; It can directly measure fluid pressure, temperature, and flow rate, and automatically track compensation and compression factor correction in real time.

　　Adopting advanced computer processing chips, it has high integration, small size, good performance, and strong overall functionality. It adopts a circuit micro power consumption design, with low overall power consumption. It can be powered by an internal battery (3.6VDC) or an external power supply (24VDC).

　　2、 Technical performance:

　　execution standard

　　The flowmeter shall comply with JJG 198-94 "Verification Regulations for Velocity Flowmeters".

　　Natural cyclone inlet vortex flowmeter flange connection type

　　Environmental conditions for use

　　Environmental temperature: -30 ℃~55 ℃

　　Relative humidity: 5% to 95%

　　Atmospheric pressure: 86KPa~106KPa

　　working conditions

　　Medium temperature range: -20 ℃ to 70 ℃

　　Nominal pressure: 1.6, 2.5, 4.0, 6.3 MPa

　　3、 Installation:

　　1. On site installation and maintenance must comply with the warning message "Do not open the lid when there is explosive gas", and turn off the external power before opening the lid.

　　2. The selection should be within the specified flow range to prevent overspeed operation, in order to achieve ideal accuracy and ensure normal service life.

　　3. To prevent damage to pipelines and instruments caused by instantaneous airflow impact, the front valve should be slowly opened before the flowmeter is put into operation, and then the rear valve should be slowly opened. After running the small flowmeter for 1-2 minutes and the instrument is running normally, the rear valve should be fully opened. When closing the valve, it should be slowly closed first and then the valve should not be suddenly closed.

　　4. It is not allowed to open the back cover or change the internal parameters of the flowmeter at will during operation, otherwise it will affect the normal operation of the flowmeter.

　　5. Do not loosen the fixed part of the flowmeter at will.

AfterSalesService :

• LUX-200 Spiral Vortex Flow Meter