Manufacturer supplies online multi parameter analyzer for residual chlorine/total chlorine/pH/temperature

Description :

　　The price is for reference only. Please call or WeChat firstQQ Consultation

　　For more product information, please contact the product manager: Dong Jinshuai

　　QQ：1816374689

　　Telephone:

　　Mobile phone: (WeChat)

　　We can customize non-standard instruments according to user needs. Welcome to call us~

　　************************

　　PCA320 Residual Chlorine/Total Chlorine/pH/Temperature Multi Parameter Online Analysis and Measurement Instrument

　　PCA series multi parameter online analysis and measurement instrument, widely used in swimming pools SPA、 Various fields such as drinking water and sewage treatment. The measurement system is more complete and can continuously monitor the residual chlorine and total chlorine concentrations in flowing samples, with a measurement range of 0 to 5mg/L and a resolution of 0.01. The operating principle is based on the DPD 330.5 method recommended by EPA. If the sampling interval is 10 minutes, the reagent can be used continuously for several months. Through a transparent window, data can be viewed and the usage of reagents can be confirmed. The operator can choose the dosing set point, which will activate dosing when the measurement result is below the set point. At the same time, it is possible to select alarms below or above the set point. Set point control relay for proportional dosing. PH can be adjusted using acid-base reagents through ON/OFF or proportional dosing mode. All measurement parameters can be selected with a GSM module that can send SMS data messages. The instrument casing complies with NEMA 4X standards: made of polyester fiberglass material, with superior chemical corrosion resistance and high temperature resistance. The unique design makes the instrument easy to install, and the gasket on the front cover gives the instrument good waterproof, moisture-proof, and dust-proof performance.

　　Manufacturer supplies online multi parameter analyzer for residual chlorine/total chlorine/pH/temperature

　　Multiple parameters are monitored online simultaneously

　　Can be controlled by switch or proportional control

　　Voltage and current analog signal output

　　Background light large screen display

　　? Friendly user interface

　　RS 485 communication interface, capable of data transmission

　　Choose a GSM module that can send SMS data messages

　　Model PCA320

　　Range residual chlorine& Total chlorine 0.00 to 5.00 mg/L

　　pH 0.00 to 14.00 pH

　　Temperature 5.0 to 75.0 ° C

　　Resolution residual chlorine& Total chlorine 0.01 mg/L

　　pH 0.01 pH

　　Temperature 0.1 ° C

　　Precision residual chlorine& Total chlorine ± 8% ± 0.05 mg/L

　　pH ±0.05 pH

　　Temperature ± 0.5 ° C

　　Small detection limit residual chlorine& Total chlorine 0.05 mg/L

　　Input resistance 1012 Ohm

　　Calibration residual chlorine& Total Chlorine

　　single point

　　Calibrate pH 1 or 2 points

　　Measurement interval residual chlorine& Total Chlorine

　　3 to 90 minutes, optional

　　PH 3 to 120 seconds, optional

　　Dosing control residual chlorine& Total chlorine 4-20 mA proportional control

　　PH ON/OFF control, 4-20 mA proportional control

　　Control range residual chlorine& Total chlorine 0.1 to 5 mg/L, optional

　　Delta pH 0.1 to 2 pH ， optional

　　Output signal 0-10 mV, 0-100 mV, 4-20 mA or 0-20 mA

　　Communication interface RS485 port, electrically isolated

　　Baud rates of 1200, 2400, 4800, 9600 bps

　　Data storage for 3500 measurement data

　　Alarm relay SPDT type relay, 5A, 230 V resistive load

　　SPDT type dosing relay, 5A, 230 V resistive load

　　System error relay SPDT type relay, 5A, 230 V resistive load

　　Injection pressure 0.07 to 4 bar (if the pressure exceeds 4 bar, a pressure regulator is required)

　　Sample flow rate 100 to 300 mL/min

　　Sample temperature 5 to 40 ° C (41 to 104 ° F)

　　Injection port 12 mm (1/2 ") diameter

　　Drain port with a diameter of 10 mm (3/8 ") and equipped with a wire clamp

　　Power supply mode: 115 Vac or 230 Vac; 50/60 Hz; 20 VA

　　Protection level NEMA-4X standard, polymer fiberglass shell, transparent window

　　Size/Weight 318 x 267 x 159 mm (12.5 x 10.5 x 6.25 "), 5KG

　　Manufacturer supplies online multi parameter analyzer for residual chlorine/total chlorine/pH/temperature

　　Manufacturer supplies online multi parameter analyzer for residual chlorine/total chlorine/pH/temperature

　　The price is for reference only. Please call or WeChat firstQQ Consultation

　　For more product information, please contact the product manager: Dong Jinshuai

　　QQ：1816374689

　　Telephone:

　　Mobile phone: (WeChat)

　　We can customize non-standard instruments according to user needs. Welcome to call us~

　　************************

AfterSalesService :

• Multi parameter online water quality analysis and measurement instrument