Chengdu rapid rolling shutter door is wind resistant, rainproof, fast and safe

Description :

Characteristics of motor servo fast door:;         Chengdu rapid rolling shutter door is wind resistant, rainproof, fast and safe;    

    We have achieved full closed-loop servo control of position, speed, and torque, avoiding the cumulative and interference errors caused by variable frequency open-loop control in the door switch, and ensuring that the door does not run out of position for a long time.

Stable    Integrated EMI/EMC electromagnetic compatibility design. Improve the electromagnetic interference caused by the complex wiring of the original PLC frequency converter and encoder, and avoid faults caused by wiring and plugs

High speed; The motor has a high speed of 4000 revolutions per minute, and the door operates at a high speed of 1.95 meters per second. The ultra high speed motor brings higher efficiency

Soft and gentle;   Flexible quick start - high-speed operation - flexible slow stop, S-shaped speed curve stepless speed regulation; Advanced constant torque intelligent follow-up system, output torque follows the load changes of the door body during operation, and there is no jerking or shaking sensation during low-speed operation; The operation process is high-speed, smooth, and gives people a feeling.

Customization    Through up to a hundred control parameters, engineers can tune each door to its desired state. The system has a unique feature of recording multiple sets of state parameters and can easily restore the memory parameters with just one click in case of a malfunction.

Security    In case of emergency signal, the dynamic response time of the motor is within 30 milliseconds, and the inertia drop does not exceed 5mm, which greatly protects customer safety

High frequency;   The system has undergone 200000 consecutive uninterrupted operation tests (with a switch frequency of 10 seconds for continuous uninterrupted operation). Suitable for ultra frequent and fast passage through environments

Energy saving;   The system adopts AC permanent magnet synchronous motor (PMSM motor), which uses rare earth permanent magnet materials. Compared with traditional asynchronous induction motors, the efficiency is doubled, and it has the advantages of energy saving, light weight, low temperature rise, high torque, and double overload.

Introduction to servo fast door operation function:

The fast rolling shutter door servo control system produced by Yongxingsheng Company has the following operation modes to choose from: control cabinet operation, jog lifting, continuous lifting, emergency stop, single-sided operation box operation, delayed operation, radar operation, and geomagnetic operation.

Installation of travel controller: The servo fast rolling shutter door travel controller uses a value encoder for accurate positioning and one-time positioning. Installation involves inserting the value encoder shaft head into the reducer, locking the two wings onto the reducer with screws, and then inserting the aviation plug into the socket.

Motors and control cabinets must be grounded for protection; During installation, debugging, and opening/closing, it is strictly prohibited to stand or walk under the door.

Before closing the curtain of the servo fast rolling shutter door, it is necessary to check whether there are any obstacles under the door body. If there are, they must be cleaned thoroughly before debugging and installation.

AfterSalesService :

• Rapid Roller Shutter