Guangzhou Rapid Stacking Door Rapid Response Rapid Shipping

Description :

            Guangzhou Rapid Stacking Door Rapid Response Rapid Shipping

1. It can ensure normal use under wind conditions and has strong sealing performance, insulation performance, wind resistance performance, and anti-theft performance. The new structure is: an external sealing track is fixedly installed on the door frame, and a built-in wind resistant track is fixedly installed inside the external sealing track. The curtain passes through the external sealing track, and the introduction at both ends is embedded in the built-in wind resistant track. The seal of the external sealing track is EPDM rubber seal, so the curtain can run in the sealed track, and the introduction at both ends of the curtain can run in the built-in wind resistant track, thereby improving the wind resistance and sealing effect of the fast rolling shutter door, with a wind resistance of up to 13 levels.

2. The motor adopts high-precision servo motor, which can double limit and position to ensure that it does not run during operation, thereby further improving the safety and stability of the fast door operation, allowing it to start and stop slowly, with a service life of up to 2 million times.

3. The opening speed can reach 1-1.5 seconds/meter; Simple structure, easy operation and maintenance.

Working principle of rapid stacking door:

Control system: using high-tech PLC and frequency converter control.

1) Stacking doors save space for you: The large area of material PVC can be stored in a very small volume and rolled onto a metal shaft, saving container space.

2) Stacking doors have good wind resistance. PVC doors reinforced with horizontally spaced metal steel bars have high wind resistance even for large sizes. This function can protect workers and goods from obstruction caused by improper operation.

3) The sealing and dustproof properties of the stacking door can be achieved by folding PVC fabric, which maintains good sealing even in windy weather.

Quick stacking door features:

★ Electric device configuration: The motor design is designed by engineers based on its operating characteristics, and does not require air or cold for motors that are frequently turned on. It has fast heat dissipation and high temperature resistance.

★ Characteristics of trackless operation technology: The wheels of the trackless door are made of advanced wear-resistant rubber, and there is no obvious wear after 300000 operation tests. The trackless door has a middle guide strip for guidance and multiple double nylon wheels to hold the guide strip, so that the door is not affected by strong winds during operation

Blow and destroy
★ Control system: The control system adopts internationally advanced weak current control method, which converts strong current into weak electromagnetic induction control. The sensitivity of door opening and closing is high, and there is no leakage or injury phenomenon.

★ Opening buffer device: The starting device adopts a combination of electronic control current and mechanical buffer device, eliminating the instantaneous impact force caused by the opening of the stacking door, making it open smoothly without shaking, and the opening speed is 0.5-1.0 meters per second.

AfterSalesService :

• Quick stacking door