Non dispersive infrared CO analyzer RC-3011 Infrared CO analyzer National standard method Non dispersive infrared principle

Description :

　　Non dispersive infrared RC-3011 infrared CO analyzer National standard method Non dispersive infrared principle Portable CO analyzer

　　Non dispersive infrared CO analyzer RC-3011 Infrared CO analyzer National standard method Non dispersive infrared principle

　　Non dispersive infrared RC-3011 infrared CO analyzer

　　The principle of non dispersive infrared in the national standard methodRC-3011infraredCOanalyzer

　　Non dispersive infrared radiationRC-3011 infraredCOanalyzer

　　RCHB123：I3345OI4433

　　Even if it's hard, one must choose a scorching life.

　　Accept all the pressure and challenges,

　　Just to become a better version of oneself!

　　Saying goodbye to October is both the end and the beginning.

　　Growing and achieving each other

　　1、 InfraredCOBrief Introduction to Gas Analysis:

　　It is a technology developed by our company Xin that utilizes the principle of infrared spectroscopy absorption to detect low concentrations ofyiCarbon oxide measuring instrument, infraredyiCarbon oxide detector, also capable of detectingyiCarbon dioxide concentration, temperature, and humidity. Equipped with a very clear color touch screen, sound and light alarm prompts, built-in pump, infraredyiCarbon dioxide gas analyzer is widely used for gas detection and monitoring in public places, health supervision, environmental monitoring, and other areas. Successfully solved the issue, ensuring and compensating for high and low temperature measurements with extremely high accuracy, which can be used in monitoring departments such as scientific research. This instrument complies with the national standards of GB/T18204.2-2014 "Methods for hygiene inspection in public places" and GB/T9801-88 "Determination of air quality - Non dispersive infrared method for carbon dioxide", and conforms to JJG635-2011《yiNational Metrological Verification Regulations for Infrared Gas Analyzer of Carbon Oxide and Carbon Dioxide.

　　2、 Characteristics of Infrared CO Gas Analyzer:

　　1. Detect CO gas in the air and also measure the temperature and humidity of the environment.

　　2. The built-in suction pump can suck gas from tens of meters away into the instrument for measurement.

　　3. Equipped with a large color touch screen, it is easy and fast to operate.

　　4. The instrument displays two types of data: PPM and mg/M3, which can be automatically converted.

　　5. Automatic zero point correction technology, convenient for users to perform zero point correction in different seasons and times

　　IIICOgas analyzerTechnical Specifications:

　　Detection principle: Non dispersive infrared gas analysis method/Non dispersive infrared method (national standard)

　　Gas detection: Carbon monoxide (CO) in the air

　　Measurement method: pump suction

　　Measurement range: (displaying both ppm and mg/m3 simultaneously)

　　CO: Range of 0.0-50ppm or 200, 1000ppm

　　Temperature: -20 ∽ 60 ℃. Humidity: 10-95% RH

　　Resolution: 0.1 × 10-6

　　Linear error: ≤± 2% F · S

　　Repeatability: ≤ 1.0%

　　Zero drift: ≤± 2% F · S/h

　　Range drift: ≤± 2% F · S/3h

　　Preheating time: 30 minutes

　　Response time: ≤ 60 seconds

　　Flow range: (0.5-2.0) L/min

　　Power supply: AC/DC dual-use, 220V (± 10%) or built-in rechargeable battery

　　4、 Infrared CO gas analyzerto configure:

　　(1) One instrument host (including built-in battery)

　　(2) One charger

　　(3) One sampling hose

　　(4) One aluminum alloy carrying case

　　 (5) One copy of the operation manual

　　(6) One certificate of conformity

AfterSalesService :

• Non dispersive infrared CO analyzer