Description :

　　oneTherackpart:

　　1.1. The entire machine is welded with a 304 stainless steel frame;

　　1.2. The motor box head frame plate is welded with A3 iron plate;

　　1.3. There are movable directional wheels and positioning devices in contact with the ground;

　　1.4 Automatic box dropping system, misplacement of boxes, empty cup detection. Empty cup shutdown

　　2. Mold section:

　　2.1. The template is designed according to the principle of one out of twelve; Double Six Rows

　　2.2. Process the template according to the sample provided by Party B, and arrange the template according to the sample film provided by Party B;

　　2.3. Acid resistant aluminum is cast using special processing techniques;

　　3. Automatic filling system:

　　3.1 The server is equipped with a measuring cylinder and a rotary valve for quantitative filling. The filling amount can be adjusted, and the error range for filling bottom material and red oil is ± 2 grams;

　　3.2 Filling nozzle with automatic suction function, no residue or leakage; Both sets of filling nozzles are equipped with feeding slots.

　　3.32 filling hoppers with heating, stirring, and liquid level control devices;

　　3.4 Filling 2 with anti splash function, with the filling nozzle moving downwards/the bottom tray receiving the material on the tray;

　　4. Automatic coding system:

　　4.1 American Weidijie inkjet printer, high-speed reciprocating track

　　5. Automatic film release system:

　　5.1. Use stainless steel thick arm steel pipes for the film placement shaft, and use a quick disassembly top film cone top;

　　5.2. The axial direction of the film placement axis can be fine tuned;

　　5.3. Use a supported structure on the other end of the film placement shaft;

　　6. Sealing part:

　　6.1. Adopting constant temperature (intelligent temperature control) hot pressing sealing, with adjustable sealing pressure;

　　6.2. Use heating and heat sealing to ensure a more secure seal;

　　7. Cutting blade section:

　　7.1 Cold cutting tool, serrated tool,

　　7.2 Pre cutting blade seam

　　7.2 Knife 1 is a quadruple box with a cup cutting strap that is easy to tear;

　　7.3 Knife 2 is used for single box cutting, which is an independent individual product;

　　8. OutboxSystem:

　　8.1. Use suction cups to extract from the box;

　　9. Transmission system:

　　9.1. Composed of motors, reducers, templates, etc., high-performance reducers;

　　9.2. The chain adopts 10A-1 or 12A-1 short pitch precision roller stainless steel thickened chain processed according to GB/T1243 standard;

　　9.3. Stainless steel sprocket shaft, bearings and base, green PE guide rail. Transmission translation, low impact force, accurate positioning;

　　9.4. Adopt stainless steel bearings and stainless steel bearing seats;

　　8、 Customized packaging machine equipment configuration technical parameters according to demand

　　1. Production capacity: The stable operating speed of the 12 box packaging machine empty machine is about 9800-10800 boxes/hour (speed adjustable);

　　2. Mold template shape: 12 cup single row 6-hole template each time;

　　3. Air pressure consumption:>0.6-0.8MPa, 1.5m3;

　　4. Power supply voltage: 380V, 50HZ;

　　5. Total power: 15kw for 12 connected cups;

　　6. Equipment size: 12 cups are approximately 6000 * 1000 * 1900mm

AfterSalesService :

• Small box fermented bean curd sealing machine