Changsha microbead anti slip and ultra wear-resistant floor paint has compressive, wear-resistant, impact resistant, and long service life
Category:
fine chemicals /Coatings, Paints/Floor paint
Model:
Micro bead anti slip and ultra wear-resistant floor paint
Brand:
supe
brand:
supe
model:
Micro bead anti slip and ultra wear-resistant floor paint
type:
Epoxy class
Liquid type:
Solvent based
Properties of film-forming material:
organic
Classified by solvent type:
Oil paint
Retail Price
48.00USD
重量
kg
- Product Description
-
brand supe
model Micro bead anti slip and ultra wear-resistant floor paint
type Epoxy class
Liquid type Solvent based
Properties of film-forming material organic
Classified by solvent type Oil paint
Description :
Scope of Application
The ground of special places such as supermarkets, hallways, warehouses, car showrooms, car repair shops, and car parking lots.
Areas with high mechanical performance requirements, such as the floors of mechanical, electronic, electrical, instrumentation, pharmaceutical, textile, clothing, food, tobacco and other enterprise factories with certain impact.
Performance Characteristics
The surface particles have uniform fineness, small fluctuations, high resistance, and good anti slip performance;
◇ Reasonable construction, smooth and comfortable without vibration, low noise, beautiful and anti-skid;
◇ Compression resistance, wear resistance, impact resistance, and long service life;
◇ Firmly bonded to the base layer, with a seamless surface that is not easily peeled off or cracked;
Good drainage performance, no accumulation of dirt, reducing or even eliminating splashing and water film, increasing driving safety in rainy days
construction technology
Process Name Specific methods and requirements Recommended dosage Base treatment 1. Use a grinder to polish and vacuum to form a basic, flat, dry, and clean base surface. Primer layer 1. Mix the materials according to the ratio, and then use a mixer to stir evenly; 2. Use a scraper to scrape or a roller to apply evenly without any omissions.
0.15-0.20Kg/m2 Medium coated mortar layer 1. Mix the paint and curing agent in the specified ratio (weight ratio) and stir evenly; 2. Slowly add an appropriate amount of quartz sand and use a flat knife for scraping.
0.7kg/m2/mm Intermediate putty layer 1. Mix the colored paint and curing agent in the specified ratio, stir thoroughly and evenly; 2. Add an appropriate amount of quartz powder and stir. Use a flat knife to scrape it thoroughly within a limited time.
0.2-0.30 kg/m2 topcoat After the putty layer solidifies, stir the main material of the microbead anti slip topcoat evenly; 2. Add the curing agent to the paint bucket, stir thoroughly, and then apply it evenly with a roller until the surface particle fineness is uniform.
0.12 kg/m2/mm 
Construction section
Micro bead anti slip floor paint coating structure
Hunan Jiangcai Xin Coating Co., Ltd. is dedicated to serving you 24 hours a day. Looking forward to your call!
AfterSalesService :
Key words:- Changsha microbead anti slip and ultra wear-resistant floor paint
More Products
