Epoxy self leveling floor coating, clean workshop floor paint

Description :

epoxyself-levelingFloor construction technologybase treatment

　　1. Construction tools: moisture content tester, dust-free grinder, angle grinder, portable grinder, large vacuum cleaner, flat trowel, shovel, and specialized cleaning tools.

　　2. Purpose: To improve the overall flatness of the ground, remove impurities from the surface of the concrete floor, and increase the adhesion of the floor;

　　3. Requirements: The ground should be solid, free of sand holes, potholes, and dry, clean, and free of dust, oil, cement, gravel, and other debris;

　　4. Construction steps

　　1) Use a moisture content tester to measure the ground moisture content, which should be less than 8%. If it exceeds 8%, measures such as ventilation and warming should be taken to reduce the moisture content.

　　2）

　　Polish with a grinder, angle grinder, or portable grinder to improve flatness, while ensuring that the ground is not too smooth. Use specialized cleaning tools to remove impurities such as floating sand and slurry from the ground to ensure cleanliness of the construction area.

Bottom oil construction

　　1. Diou101 high penetration epoxy primer

　　1) Construction tools: mixers, scrapers, specialized cleaning tools, etc;

　　2) Construction method: Mix the epoxy resin floor primer Diou101 in proportion and stir evenly. Use a scraper to scrape the entire construction area. After it is completely dry, proceed to the next process;

　　2. Treatment of cracks such as settlement joints, structural joints, and expansion joints

　　1) After cutting V-shaped grooves along ordinary cracks, fill them with solvent-free epoxy resin mortar;

　　2) After cutting V-shaped grooves along the gaps such as settlement joints, structural joints, and expansion joints, use solvent-free epoxy resin to fix the expansion joints

　　Fill and level with grease mortar, and paste 1-2 layers of glass fiber cloth with a width of about 10cm at the expansion joint;

Construction of epoxy resin mortar layer

　　1. Construction of Diou201 mortar layer coated with epoxy resin

　　1) Construction tools: mixer, trowel, etc;

　　2) Construction method: Mix solvent-free epoxy resin Diou201 in proportion and stir evenly. Mix with quartz sand in proportion and use a trowel to evenly coat the construction area. Dry completely and proceed to the next process;

　　3) Attention: The construction surface must be flat, and the coating must be uniform without any omissions.

　　2. Intermediate coating polishing: Use a dust-free polishing machine to fully polish the construction area, and use a handheld grinder to polish some areas; Handle the lower layer polishing pores, repair the floor surface, and improve the surface flatness;

　　3. Application of Diou201 putty layer in epoxy resin

　　1) Construction tools: mixer, trowel, etc;

　　2) Construction method: Mix the solvent-free epoxy resin Diou201 in proportion and stir evenly. Mix with quartz powder in proportion and use a flat trowel to level the ground and apply it to the construction area. Dry it completely and proceed to the next process;

　　Attention: The construction surface must be flat, and the coating must be uniform without any omissions.

Construction of epoxy resin topcoat

　　Construction of epoxy self flowing flat paint Diou802

　　1) Material: Epoxy resin topcoat Diou802

　　2) Construction tools: mixer, toothed trowel;

　　3）

　　Construction method: Pour solvent-free epoxy self leveling Diou802 onto the ground and use a toothed trowel to evenly level it to ensure uniform coating thickness.

AfterSalesService :

• Epoxy self leveling floor coating