Manufacturer supplied hydraulic quick connector HS-FF flat hydraulic quick connector

Description :

　　HS-FF Flat Hydraulic Quick Coupling (Carbon Steel) (New) (018)

　　Product Material:Mother: Carbon Steel/Male Head: Carbon Steel/Product Description: How to Translate Compliant with ISO16028 standard

　　Product Application:The HS-FF series connectors are widely used in the following public facilities: hydraulic oil leakage can pose a serious safety hazard, especially for overhead bucket cranes used for maintenance of high-voltage power transmission lines. These connectors are also used for quick switching of hydraulic equipment in construction, railway maintenance, and mining, and are easy to clean, making them ideal for use in such special environments

　　Interchangeability:PARKER FE and FF series from the United States, STUCCHI A8008 series from Italy, AEROQUAP FD89 series from the United States, and HANSEN QA2900 series from the United States

　　Application: HS-FF series connectors are widely used in the following public facilities: hydraulic oil leakage can pose a serious safety hazard, especially for overhead bucket cranes used for maintenance of high-voltage power transmission lines. These connectors are also used for quick switching of hydraulic equipment in construction, railway maintenance, and mining, and are easy to clean, making them ideal for use in such special environments.

　　The HS-FF series connectors have the following characteristics:

　　1. The design of the new valve can resist the impact of high-speed fluid and pulse pressure, providing higher performance

　　2. The sleeve locking mechanism engages by rotating the sleeve after connection, and can prevent accidental disconnection when dragging the joint along the ground during use.

　　3. The design of the locking mechanism helps prevent debris from entering the internal mechanism and causing misoperation during connection or disconnection. The sleeve covers the retaining ring and includes a dust seal in the ejection area.

　　4. The quenched male plug and sleeve, as well as the solid rod-shaped structure, create high-quality female connectors that can resist erosion and damage caused by hydraulic and mechanical impacts.

　　5. This sealing ring is designed to prevent bursting or damage in hazardous working conditions.

　　6. Durable ball lock can be reliably connected, with several locking steel balls evenly distributing the workload, while providing alignment and rotation actions to reduce hose twisting and extend hose service life. Warning: This type of product cannot be used as a rotating male joint, as rotating under pressure can cause excessive and premature wear.

　　7. The HS-FF series connectors use a flush valve mechanism for connection and disconnection, which means that the engagement between valves can result in only a small loss of fluid when disconnected or only a small amount of air when reconnected.

　　8. Adopting new environmentally friendly galvanizing technology to provide higher rust prevention performance

　　9. HS-FF connector complies with ISO16028 standard.

　　10. And exchange with the following products: PARKER FEM series from the United States, STUCCHI FIRG series from Italy, AEROQUIP FD89 series from the United States, and Hansen FF series from the United States. Performance: Test liquid oil-200SUS, 1GPM=3.78L/min, 1PSID=0.0069MPa

AfterSalesService :

• Quick connector manufacturer