The layout requirements for the installation of fire turrets require manufacturers to customize them according to their needs. With years of experience in fire production, they are reliable

Description :

　　Fire safety precautions during the Spring Festival period

　　Natural gas

　　Attention should be paid to valve safety hazards when using gas

　　During the Spring Festival, there is frequent use of fire. Improper use of gas can not only lead to poisoning, but also cause fire and explosion accidents.

　　When you smell a slight odor of combustible gas in your home, carefully identify and eliminate it. If it is confirmed that there is a slight leakage of combustible gas, immediately open the window and reduce the concentration of combustible gas, and close the valve. At the same time, do not turn on or off electrical appliances, such as turning on lights (whether wired or button type), opening exhaust fans, turning on range hoods, and making phone calls (whether on a landline or mobile phone), to avoid generating electric sparks and arcs, which can ignite flammable gases.

　　When a gas leak causes a fire, if the flame is small, a damp towel or cloth can be used to cover the ignition point and extinguish it; If the flames are strong, you can wet yourself, cover your hands and face with wet towels and clothes, and cover your mouth. Bend down to keep your body as close to the ground as possible, and quickly leave the room to a safe place. In case of a fire, don't forget to call 119 to report it.

　　The PT series fire turret produced by Shandong Dongyue Crane and Fire Equipment Manufacturing Co., Ltd. is a firefighting equipment used in conjunction with fire cannons. Its structure is designed in strict accordance with relevant national standards, ensuring safety and stability, and equipped with certain safety protection measures and spray cooling measures. Equipped with ladder protection cage and lightning protection.

　　The PT series fire turret produced by Shandong Dongyue Crane and Fire Equipment Manufacturing Co., Ltd. comes in two specifications: spiral steel pipe structure and lattice structure; From the perspective of performance, it can be divided into single operation platform and dual operation platform. A 1.2m fence fence is set around the operating platform. The top operating platform is equipped with a lightning arrester. Each operating platform is equipped with a water spray cooling system, and each operating platform can be equipped with a fire water monitor and a foam water dual purpose monitor at the same time; The climbing ladder is equipped with protective cages, which increases safety performance. The fire turret produced by Dongyue, Shandong has a scientific design, advanced technology, mature technology, low price, wind and earthquake resistance, short supply cycle, and high safety performance. It can be customized according to customer requirements.

　　The layout of the fire turret should meet the following requirements:

　　1) The height to width ratio of building fire turrets for Class A, B, and C liquid storage tank areas, vaporized hydrocarbon storage tank areas, and petrochemical production and manufacturing equipment should be clearly defined, and reasonable maintenance should be carried out on the other half of the equipment being maintained using fire cannons;

　　2) The height to width ratio of the fire turret in the loading and unloading ports for Class A, B, and C liquids, refined oil, compressed natural gas, and gas should be higher than the deck height to width ratio at the tide level and when the ship is fully loaded in the design scheme, based on the tilt and rotation core height to width ratio of the fire cannon; The distance between the horizontal rotating core of the fire monitor and the front edge of the port shall not be less than 2.5m;

　　3) A safe passage should be left around the building's fire turret for equipment maintenance.

　　The installation of the fire turret must meet the following requirements:

　　The ground base for installing the fire turret should be stable, and the reinforced concrete base should have sufficient curing time after construction.

　　The connection between the fire turret and the ground base should be fixed and reliable.

　　The lifting and positioning site of the fire turret should have sufficient space, and the fire turret should not collide with surrounding structures during the lifting process.

　　After the installation of the fire turret, corresponding anti-corrosion measures should be taken.

　　5. The fire turret should be grounded for lightning protection, and the construction should comply with the relevant provisions of the current national standard "Code for Design of Lightning Protection of Buildings" GB50057. After the construction is completed, concealed works should be inspected in a timely manner.

AfterSalesService :

• Layout requirements for installation of fire turret